Payment Method
LP8866QDCPRQ1
Automotive display LED-backlight driver with six 200-mA channels
-
Manufacturer:
-
Mfr.Part #:
LP8866QDCPRQ1
-
Datasheet:
-
Series:
Automotive, AEC-Q100
-
Type:
DC DC Controller
-
Topology:
SEPIC, Step-Up (Boost)
-
Internal Switch(s):
Yes
-
EDA/CAD Models:
Availability: 6666 PCS
Please fill in the short form below and we will provide you the quotation immediately.
LP8866QDCPRQ1 General Description
The LP8866-Q1 is an automotive high-efficiency LED driver with boost controller. The Six high-precision current sinks support phase shifting that is automatically adjusted based on the number of channels in use. LED brightness can be controlled globally through the I²C interface or PWM input.
The boost controller has adaptive output voltage control based on the headroom voltages of the LED current sinks. This feature minimizes the power consumption by adjusting the boost voltage to the lowest sufficient level in all conditions. A wide-range adjustable frequency allows the LP8866-Q1 to avoid disturbance for AM radio band.
The LP8866-Q1 supports built-in hybrid PWM dimming and analog current dimming, which reduces EMI, extends the LED lifetime, and increases the total optical efficiency.
Key Features
- AEC-Q100 qualified for automotive applications:
- Device temperature grade 1: –40°C to +125°C, TA
- Device HBM ESD classification level 2
- Device CDM ESD classification level C4B
- Input voltage operating range 3 V to 48 V
- Six high-precision current sinks
- Up to 200-mA DC current for each current sink
- Current matching 1% (typical)
- Dimming ratio 32 000:1 using 152-Hz LED output PWM frequency
- Up to 16-bit LED dimming resolution with I2C, or PWM input
- 8 Configurable LED strings configuration
- Auto-phase shift PWM dimming
- 12-bit Analog dimming
- Up to 48-V VOUT boost or SEPIC DC/DC controller
- Switching frequency 100 kHz to 2.2 MHz
- Boost spread spectrum for reduced EMI
- Boost sync input to set boost switching frequency from an external clock
- Output voltage automatically discharged when boost is disabled
- Extensive fault diagnostics
Specifications
Category | Integrated Circuits (ICs)Power Management (PMIC)LED Drivers | Series | Automotive, AEC-Q100 |
Type | DC DC Controller | Topology | SEPIC, Step-Up (Boost) |
Internal Switch(s) | Yes | Number of Outputs | 6 |
Voltage - Supply (Min) | 3V | Voltage - Supply (Max) | 48V |
Voltage - Output | 0V ~ 48V | Current - Output / Channel | 200mA |
Frequency | 100kHz ~ 2.2MHz | Dimming | PWM |
Applications | Automotive, Backlight | Operating Temperature | -40°C ~ 125°C (TA) |
Mounting Type | Surface Mount | Base Product Number | LP8866 |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
LP8866QDCPRQ1 Datasheet PDF
LP8866QDCPRQ1 PDF Preview
Availability: 6666 PCS
+BOMQty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for LP8866QDCPRQ1, guaranteed quotes back within 12hr.
All is fine, thanks, BUT where I can find schema or some instruction for this kit?