This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

LP2987IMM-3.3/NOPB

Linear Voltage Regulator IC Positive Fixed 1 Output 200mA 8-VSSOP

Manufacturer:

Texas Instruments, Inc
Mfr.Part #:

LP2987IMM-3.3/NOPB
Datasheet:

LP2987IMM-3.3/NOPB Datasheet (PDF)
Output options:

Fixed Output
Iout (max) (A):

0.2
Vin (max) (V):

16
Vin (min) (V):

2.1
EDA/CAD Models:

Request Free CAD Models for LP2987IMM-3.3/NOPB

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

LP2987IMM-3.3/NOPB General Description

The LP2987/8 are fixed-output 200 mA precision LDO voltage regulators with power-ON reset delay which can be implemented using a single external capacitor.

The LP2988 is specifically designed for noise-critical applications. A single external capacitor connected to the Bypass pin reduces regulator output noise.

Using an optimized VIP (Vertically Integrated PNP) process, these regulators deliver superior performance:

Dropout Voltage: 180 mV @ 200 mA load, and 1 mV @ 1 mA load (typical).

Ground Pin Current: 1 mA @ 200 mA load, and 200 μA @ 10 mA load (typical).

Sleep Mode: The LP2987/8 draws less than 2 μA quiescent current when shutdown pin is held low.

Error Flag/Reset: The error flag goes low when the output drops approximately 5% below nominal. This pin also provides a power-ON reset signal if a capacitor is connected to the DELAY pin.

Precision Output: Standard product versions of the LP2987 and LP2988 are available with output voltages of 5.0V, 3.8V, 3.3V, 3.2V, 3.0V, or 2.8V, with specified accuracy of 0.5% (“A” grade) and 1% (standard grade) at room temperature.

Texas Instruments, IncMicrosoft.AspNetCore.Mvc.Localization.LocalizedHtmlString

Key Features

Ultra Low Dropout Voltage
Power-ON Reset Delay Requires Only One Component
Bypass Pin for Reduced Output Noise (LP2988)
Specified Continuous Output Current 200 mA
Specified Peak Output Current > 250 mA
SOIC-8 and VSSOP-8 Surface Mount Packages
<2 μA Quiescent Current when Shutdown
Low Ground Pin Current at All Loads
0.5% Output Voltage Accuracy (“A” Grade)
Wide Supply Voltage Range (16V Max)
Overtemperature/overcurrent Protection
−40°C to +125°C Junction Temperature Range

All trademarks are the property of their respective owners.

Specifications

Output options	Fixed Output	Iout (max) (A)	0.2
Vin (max) (V)	16	Vin (min) (V)	2.1
Vout (max) (V)	5	Vout (min) (V)	3
Fixed output options (V)	3, 3.3, 5	Noise (µVrms)	100
Iq (typ) (mA)	0.1	Thermal resistance θJA (°C/W)	160
Rating	Catalog	Load capacitance (min) (µF)	4.7
Regulated outputs (#)	1	Features	Enable, Power good
Accuracy (%)	2	PSRR at 100 KHz (dB)	42
Dropout voltage (Vdo) (typ) (mV)	180	Operating temperature range (°C)	-40 to 125