This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

LMV358M

General Purpose Amplifier 2 Circuit Rail-to-Rail 8-SOIC

Manufacturer:

Texas Instruments, Inc
Mfr.Part #:

LMV358M
Datasheet:

LMV358M Datasheet (PDF)
Number of channels:

2
Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V):

5.5
Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V):

2.7
Rail-to-rail:

In to V-, Out
EDA/CAD Models:

Request Free CAD Models for LMV358M

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

LMV358M General Description

The LMV358-N and LMV324-N are low-voltage (2.7 V to 5.5 V) versions of the dual and quad commodity op amps LM358 and LM324 (5 V to 30 V). The LMV321-N is the single channel version. The LMV321-N, LMV358-N, and LMV324-N are the most cost-effective solutions for applications where low-voltage operation, space efficiency, and low price are important. They offer specifications that meet or exceed the familiar LM358 and LM324. The LMV321-N, LMV358-N, and LMV324-N have rail-to-rail output swing capability and the input common-mode voltage range includes ground. They all exhibit excellent speed to power ratio, achieving 1 MHz of bandwidth and 1-V/µs slew rate with low supply current.

The LMV321-N is available in the space saving 5-Pin SC70, which is approximately half the size of the 5-Pin SOT23. The small package saves space on PC boards and enables the design of small portable electronic devices. It also allows the designer to place the device closer to the signal source to reduce noise pickup and increase signal integrity.

The chips are built with Texas Instrumentss advanced submicron silicon-gate BiCMOS process. The LMV321-N/LMV358-N/LMV324-N have bipolar input and output stages for improved noise performance and higher output current drive.

Key Features

For V⁺ = 5 V and V⁻ = 0 V, unless otherwise specified
LMV321-N, LMV358-N, and LMV324-N are available in automotive AEC-Q100 grade 1 and grade 3 versions
Ensured 2.7-V and 5-V performance
No crossover distortion
Industrial temperature range −40°C to +125°C
Gain-bandwidth product 1 MHz
Low supply current
LMV321-N 130 µA
LMV358-N 210 µA
LMV324-N 410 µA
Rail-to-rail output swing at 10 kΩ V⁺− 10 mV and V⁻+ 65 mV
V_CM range −0.2 V to V⁺− 0.8 V

Application

Voltage regulation
Sensor amplification or buffering

Specifications

Number of channels	2	Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)	5.5
Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)	2.7	Rail-to-rail	In to V-, Out
GBW (typ) (MHz)	1	Slew rate (typ) (V/µs)	1
Vos (offset voltage at 25°C) (max) (mV)	7	Iq per channel (typ) (mA)	0.105
Vn at 1 kHz (typ) (nV√Hz)	39	Rating	Catalog
Operating temperature range (°C)	-40 to 125	Offset drift (typ) (µV/°C)	5
Features	Standard Amps	Input bias current (max) (pA)	250000
CMRR (typ) (dB)	65	Iout (typ) (A)	0.06
Architecture	Bipolar	Input common mode headroom (to negative supply) (typ) (V)	0
Input common mode headroom (to positive supply) (typ) (V)	-0.8	Output swing headroom (to negative supply) (typ) (V)	0.01
Output swing headroom (to positive supply) (typ) (V)	-0.01	Pin Count	8
Released Date	Jan 11, 2017	Last Modified Date	Mar 7, 2023 4:10 PM UTC