This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

LMP7717MAE/NOPB +BOM

Single Channel, 88 MHz, Precision, Low Noise, 1.8V CMOS Input, Decompensated Amplifier

Manufacturer:

Texas Instruments
Mfr.Part #:

LMP7717MAE/NOPB
Datasheet:

LMP7717MAE/NOPB Datasheet (PDF)
Series:

LMP7717
Number Of Channels:

1 Channel
GBP - Gain Bandwidth Product:

88 MHz
SR - Slew Rate:

35 V/us
EDA/CAD Models:

Request Free CAD Models for LMP7717MAE/NOPB

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

LMP7717MAE/NOPB General Description

The LMP7717 (single) and the LMP7718 (dual) low noise, CMOS input operational amplifiers offer a low input voltage noise density of 5.8 nV/√Hz while consuming only 1.15 mA (LMP7717) of quiescent current. The LMP7717/LMP7718 are stable at a gain of 10 and have a gain bandwidth (GBW) product of 88 MHz. The LMP7717/LMP7718 have a supply voltage range of 1.8V to 5.5V and can operate from a single supply. The LMP7717/LMP7718 each feature a rail-to-rail output stage. Both amplifiers are part of the LMP precision amplifier family and are ideal for a variety of instrumentation applications.

The LMP7717 family provides optimal performance in low voltage and low noise systems. A CMOS input stage, with typical input bias currents in the range of a few femto-Amperes, and an input common mode voltage range, which includes ground, make the LMP7717/LMP7718 ideal for low power sensor applications where high speeds are needed.

The LMP7717/LMP7718 are manufactured using TI’s advanced VIP50 process. The LMP7717 is offered in either a 5-Pin SOT-23 or an 8-Pin SOIC package. The LMP7718 is offered in either the 8-Pin SOIC or the 8-Pin VSSOP.

Key Features

(Typical 5V Supply, Unless Otherwise Noted)
Input Offset Voltage: ±150 µV (max)
Input Referred Voltage Noise: 5.8 nV/√Hz
Input Bias Current: 100 fA
Gain Bandwidth Product: 88 MHz
Supply Voltage Range: 1.8V to 5.5V
Supply Current Per Channel
- LMP7717: 1.15 mA
- LMP7718: 1.30 mA
Rail-to-Rail Output Swing
- @ 10 kΩ Load: 25 mV from Rail
- @ 2 kΩ Load: 45 mV from Rail
Ensured 2.5V and 5.0V Performance
Total Harmonic Distortion: 0.04% @1 kHz, 600Ω
Temperature Range: −40°C to 125°C

All trademarks are the property of their respective owners.

Specifications

Product Category	Precision Amplifiers	Series	LMP7717
Number of Channels	1 Channel	GBP - Gain Bandwidth Product	88 MHz
SR - Slew Rate	35 V/us	CMRR - Common Mode Rejection Ratio	100 dB
Output Current per Channel	60 mA	Ib - Input Bias Current	0.1 pA
Vos - Input Offset Voltage	10 uV	en - Input Voltage Noise Density	5.8 nV/sqrt Hz
Supply Voltage - Max	5.5 V	Supply Voltage - Min	1.8 V
Operating Supply Current	1.15 mA	Minimum Operating Temperature	- 40 C
Maximum Operating Temperature	+ 125 C	Shutdown	No Shutdown
Mounting Style	SMD/SMT	Amplifier Type	Low Noise Amplifier
Features	Decompensated	Height	1.45 mm
In - Input Noise Current Density	0.01 pA/sqrt Hz	Input Type	Rail-to-Rail
Length	4.9 mm	Operating Supply Voltage	3 V, 5 V
Output Type	Rail-to-Rail	Product	Precision Amplifiers
Product Type	Precision Amplifiers	PSRR - Power Supply Rejection Ratio	85 dB
Factory Pack Quantity	250	Subcategory	Amplifier ICs
Supply Type	Single	Technology	CMOS
Voltage Gain dB	110 dB	Width	3.9 mm
Unit Weight	0.006596 oz