This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

LM53601LQDSXTQ1

Buck regulator integrated circuit capable of providing a synchronous 5V output with a maximum current of 1A, housed in a 10WSON package

Manufacturer:

Texas Instruments
Mfr.Part #:

LM53601LQDSXTQ1
Datasheet:

LM53601LQDSXTQ1 Datasheet (PDF)
Vin (min) (V):

3.5
Vin (max) (V):

42
Vout (min) (V):

3.2
Vout (max) (V):

6
EDA/CAD Models:

Request Free CAD Models for LM53601LQDSXTQ1

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

LM53601LQDSXTQ1 General Description

The LM53600-Q1 and LM53601-Q1 synchronous buck regulator devices are optimized for automotive applications, providing an output voltage of 5 V, 3.3 V, or an adjustable output. Load current up to 650 mA is supported by the LM53600-Q1, while the LM53601-Q1 supports up to 1000 mA. Advanced high-speed circuitry allows the LM53600-Q1 and LM53601-Q1 devices to regulate from an input of 18 V to an output of 3.3 V at a fixed frequency of 2.1 MHz. Innovative architecture allows the device to regulate a 3.3-V output from an input voltage of only 3.8 V. The input voltage range up to 36 V, with transient tolerance of up to 42 V, eases input surge protection design. An open drain reset output, with filtering and delayed release, provides a true indication of system status. This feature negates the requirement for an additional supervisory component, saving cost and board space. Seamless transitions between PWM and PFM modes, along with a quiescent current of only 23 µA, ensures high efficiency and superior transient response at all loads. Few external components are needed allowing the generation of compact PCB layout. While the LM53600-Q1 and LM53601-Q1 devices are Q1 rated, electrical characteristics are ensured across a junction temperature range of –40°C up to 150°C.

Key Features

Qualified for automotive applications
AEC-Q100 qualified with the following results:
- Device temperature grade 1: –40°C to 125°C ambient operating temperature range
- Device HBM classification level 2
- Device CDM classification level C5
–40°C to 150°C junction temperature range (available)
Wide operating input voltage: 3.55 V to 36 V (with transient to 42 V)
Spread spectrum option available
2.1-MHz fixed switching frequency
Low quiescent current: 23 µA
Shutdown current: 1.8 µA
Adjustable, 3.3-V, or 5-V output
Maximum current load: 650 mA for LM53600-Q1, 1000 mA for LM53601-Q1
Pin-selectable forced PWM mode
RESET output with filter and delay release
External frequency synchronization
Internal compensation, soft start, current limit, and UVLO
10-lead, 3-mm × 3-mm SON package with wettable and non-wettable flanks

Specifications

Vin (min) (V)	3.5	Vin (max) (V)	42
Vout (min) (V)	3.2	Vout (max) (V)	6
Iout (max) (A)	1	Iq (typ) (mA)	0.023
Switching frequency (min) (kHz)	1890	Switching frequency (max) (kHz)	2400
EMI features	Spread Spectrum	Features	Enable, Fixed Output, Forced PWM, Frequency synchronization, Light Load Efficiency, Power good, Soft Start Fixed, Spread Spectrum, Synchronous Rectification, UVLO Fixed, Wettable flanks package
Operating temperature range (°C)	-40 to 150	Rating	Automotive
Regulated outputs (#)	1	Control mode	current mode
Duty cycle (max) (%)	98	Type	Converter