This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

LM258P

Dual, 30-V, 700-kHz operational amplifier with -25°C to 85°C operation

Manufacturer:

TI
Mfr.Part #:

LM258P
Datasheet:

LM258P Datasheet (PDF)
Part Life Cycle Code:

Active
Pin Count:

8
Reach Compliance Code:

compliant
ECCN Code:

EAR99
EDA/CAD Models:

Request Free CAD Models for LM258P

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

LM258P General Description

The LM358B and LM2904B devices are the next-generation versions of the industry-standard operational amplifiers (op amps) LM358 and LM2904, which include two high-voltage (36 V) op amps. These devices provide outstanding value for cost-sensitive applications, with features including low offset (300 µV, typical), common-mode input range to ground, and high differential input voltage capability.

The LM358B and LM2904B op amps simplify circuit design with enhanced features such as unity-gain stability, lower offset voltage maximum of 3 mV (2 mV maximum for LM358BA and LM2904BA), and lower quiescent current of 300 µA per amplifier (typical). High ESD (2 kV, HBM) and integrated EMI and RF filters enable the LM358B and LM2904B devices to be used in the most rugged, environmentally challenging applications.

The LM358B and LM2904B amplifiers are available in micro-sized packaging, such as the SOT23-8, as well as industry standard packages including SOIC, TSSOP, and VSSOP.

Key Features

Wide supply range of 3 V to 36 V (B, BA versions)
Quiescent current: 300 µA/ch (B, BA versions)
Unity-gain bandwidth of 1.2 MHz (B, BA versions)
Common-mode input voltage range includes ground, enabling direct sensing near ground
2-mV input offset voltage max. at 25°C (BA version)
3-mV input offset voltage max. at 25°C (A, B versions)
Internal RF and EMI filter (B, BA versions)
On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters.

Specifications

Source Content uid	LM258P	Part Life Cycle Code	Active
Pin Count	8	Reach Compliance Code	compliant
ECCN Code	EAR99	HTS Code	8542.33.00.01
Date Of Intro	1976-11-06	Amplifier Type	OPERATIONAL AMPLIFIER
Architecture	VOLTAGE-FEEDBACK	Average Bias Current-Max (IIB)	0.3 µA
Bias Current-Max (IIB) @25C	0.15 µA	Common-mode Reject Ratio-Min	70 dB
Common-mode Reject Ratio-Nom	80 dB	Frequency Compensation	YES
Input Offset Current-Max (IIO)	0.03 µA	Input Offset Voltage-Max	5000 µV
JESD-30 Code	R-PDIP-T8	JESD-609 Code	e4
Length	9.59 mm	Low-Bias	NO
Low-Offset	NO	Micropower	NO
Number of Functions	2	Number of Terminals	8
Operating Temperature-Max	85 °C	Operating Temperature-Min	-25 °C
Packing Method	TUBE	Peak Reflow Temperature (Cel)	NOT SPECIFIED
Power	NO	Programmable Power	NO
Qualification Status	Not Qualified	Screening Level	MIL-PRF-38535
Seated Height-Max	5.08 mm	Slew Rate-Nom	0.3 V/us
Supply Current-Max	2 mA	Supply Voltage Limit-Max	32 V
Supply Voltage-Nom (Vsup)	5 V	Surface Mount	NO
Technology	BIPOLAR	Temperature Grade	OTHER
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)	Terminal Form	THROUGH-HOLE
Terminal Pitch	2.54 mm	Terminal Position	DUAL
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED	Unity Gain BW-Nom	700
Voltage Gain-Min	25000	Wideband	NO
Width	7.62 mm	Product Category	Operational Amplifiers - Op Amps
Mounting Style	Through Hole	Number of Channels	2 Channel
Supply Voltage - Max	32 V	GBP - Gain Bandwidth Product	700 kHz
Output Current per Channel	20 mA	SR - Slew Rate	300 mV/us
Vos - Input Offset Voltage	5 mV	Supply Voltage - Min	3 V
Minimum Operating Temperature	- 25 C	Maximum Operating Temperature	+ 85 C
Ib - Input Bias Current	150 nA	Operating Supply Current	350 uA
Shutdown	No Shutdown	CMRR - Common Mode Rejection Ratio	80 dB
en - Input Voltage Noise Density	40 nV/sqrt Hz	Series	LM258
Dual Supply Voltage	+/- 3 V, +/- 5 V, +/- 9 V	Height	4.57 mm
Input Type	Rail-to-Rail	Maximum Dual Supply Voltage	+/- 16 V
Minimum Dual Supply Voltage	+/- 1.5 V	Operating Supply Voltage	3 V to 32 V, +/- 1.5 V to +/- 16 V
Product	Operational Amplifiers	Product Type	Op Amps - Operational Amplifiers
Factory Pack Quantity	50	Subcategory	Amplifier ICs
Supply Type	Single, Dual	Vcm - Common Mode Voltage	Negative Rail to Positive Rail - 1.5 V
Voltage Gain dB	100 dB	Unit Weight	0.015535 oz