This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

LM22670QMR-5.0/NOPB

3A SIMPLE SWITCHER, Step-Down Voltage Regulator with Synchronization or Adjustable Switching Freq

Manufacturer:

Texas Instruments, Inc
Mfr.Part #:

LM22670QMR-5.0/NOPB
Datasheet:

LM22670QMR-5.0/NOPB Datasheet (PDF)
Vin (min) (V):

4.5
Vin (max) (V):

42
Vout (min) (V):

1.285
Vout (max) (V):

37
EDA/CAD Models:

Request Free CAD Models for LM22670QMR-5.0/NOPB

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

LM22670QMR-5.0/NOPB General Description

The LM22670 switching regulator provides all of the functions necessary to implement an efficient high voltage step-down (buck) regulator using a minimum of external components. This easy to use regulator incorporates a 42 V N-channel MOSFET switch capable of providing up to 3 A of load current. Excellent line and load regulation along with high efficiency (> 90%) are featured. Voltage mode control offers short minimum on-time, allowing the widest ratio between input and output voltages. Internal loop compensation means that the user is free from the tedious task of calculating the loop compensation components. Fixed 5 V output and adjustable output voltage options are available. The default switching frequency is set at 500 kHz allowing for small external components and good transient response. In addition, the frequency can be adjusted over a range of 200 kHz to 1 MHz with a single external resistor. The internal oscillator can be synchronized to a system clock or to the oscillator of another regulator. A precision enable input allows simplification of regulator control and system power sequencing. In shutdown mode the regulator draws only 25 µA (typ). Built in soft-start (500 µs, typ) saves external components. The LM22670 device also has built-in thermal shutdown, and current limiting to protect against accidental overloads.

The LM22670 device is a member of Texas Instruments SIMPLE SWITCHER^® family. The SIMPLE SWITCHER^® concept provides for an easy to use complete design using a minimum number of external components and the TI WEBENCH^® design tool. TI's WEBENCH^® tool includes features such as external component calculation, electrical simulation, thermal simulation, and build-It boards for easy design-in.

Key Features

Wide Input Voltage Range: 4.5 V to 42 V
Internally Compensated Voltage Mode Control
Stable with Low ESR Ceramic Capacitors
120 mΩ N-channel MOSFET PFM Package
100 mΩ N-channel MOSFET SO PowerPAD-8 Package
Output Voltage Options:
-ADJ (Outputs as Low as 1.285 V)
-5.0 (Output Fixed to 5 V)
±1.5% Feedback Reference Accuracy
500 kHz Default Switching Frequency
Adjustable Switching Frequency and Synchronization
–40°C to 125°C Operating Junction
Temperature Range
Precision Enable Pin
Integrated Boot-Strap Diode
Integrated Soft-Start
Fully WEBENCH^® enabled
LM22670-Q1 is an Automotive Grade Product
that is AEC-Q100 Grade 1 Qualified (–40°C to +125°C
Operating Junction Temperature)

Specifications

Vin (min) (V)	4.5	Vin (max) (V)	42
Vout (min) (V)	1.285	Vout (max) (V)	37
Iout (max) (A)	3	Iq (typ) (mA)	3.4
Switching frequency (min) (kHz)	200	Switching frequency (max) (kHz)	1000
Features	Enable, Frequency synchronization, Over Current Protection, Soft Start Fixed	Operating temperature range (°C)	-40 to 125
Rating	Automotive	Regulated outputs (#)	1
Control mode	Voltage mode	Duty cycle (max) (%)	90
Type	Converter	feature-type	Synchronous Step Down
feature-isolation		feature-process-technology
feature-output-type	Fixed	feature-switching-frequency-khz	500(Typ)
feature-number-of-outputs	1	feature-output-voltage-v	5
feature-maximum-output-current-a	3	feature-maximum-output-power-w
feature-minimum-input-voltage-v	4.5	feature-maximum-input-voltage-v	42
feature-typical-switch-current-a		feature-efficiency-	90(Min)
feature-packaging	Tube	feature-rad-hard
feature-pin-count	8	feature-cecc-qualified	No
feature-esd-protection	Yes	feature-escc-qualified
feature-military	No	feature-aec-qualified	Yes
feature-aec-qualified-number	AEC-Q100	feature-eccn-code	EAR99
feature-svhc	No	feature-svhc-exceeds-threshold	No