Payment Method
LAN9420I-NU
Single Chip Ethernet Controller supporting 10Mbps/100Mbps, operates at 3.3V, housed in a 128-Pin VTQFP package."
-
Manufacturer:
-
Mfr.Part #:
LAN9420I-NU
-
Datasheet:
-
Comments:
10Base-T/100Base-TX Ethernet Controller with PCI interface
-
Ethernet Bandwidth:
10/100Mbps
-
TX/RX RAM Buffer(Bytes):
N/A
-
Interrupt Pin:
1
-
EDA/CAD Models:
Availability: 3711 PCS
Please fill in the short form below and we will provide you the quotation immediately.
LAN9420I-NU General Description
LAN9420/LAN9420i is a full-featured, Fast Ethernet controller which allows for the easy and cost-effective integration of Fast Ethernet into a PCI-based system. LAN9420/LAN9420i consists of a PCI Local Bus Specification Revision 3.0 compliant interface, DMA Controller, Ethernet MAC, and 10/100 Ethernet PHY.
LAN9420/LAN9420i provides full IEEE 802.3 compliance and all internal components support full/half-duplex 10BASE-T, 100BASE-TX, and manual full-duplex flow control. The descriptor based scatter-gather DMA supports usage of zero-copy drivers, effectively increasing throughput while decreasing Host load. The integrated IRQ deassertion timer allows a minimum IRQ deassertion time to be set, providing reduced Host load and greater control over service routines. Automatic 32-bit CRC generation/checking, automatic payload padding, and 2K jumbo packets (2048 byte) are supported.
*The LANCheck online design review service is subject to Microchip's Program Terms and Conditions and requires a myMicrochip account.
Key Features
- Optimized for embedded applications with 32-bit RISC CPUs
- Integrated descriptor based scatter-gather DMA and IRQ deassertion timer effectively increase network throughput and reduce CPU loading
- Integrated Ethernet MAC with full-duplex support
- Integrated 10/100 Ethernet PHY with HP Auto-MDIX Support
- 32-bit, 33MHz, PCI 3.0 compliant interface
- Reduced power operating modes with PCI Power Management Specification 1.1 compliance
- Supports multiple audio & video streams over Ethernet
- Cable, satellite, and IP set-top boxes
- Digital televisions
- Digital video recorders
- Home gateways
- Digital media clients/servers
- Industrial automation systems
- Industrial/single board PC
- Kiosk/POS enterprise equipment
- Fully compliant with IEEE 802.3/802.3u
- Integrated Ethernet MAC and PHY
- 10BASE-T and 100BASE-TX support
- Full- and Half-duplex support
- Full-duplex flow control
- Preamble generation and removal
- Automatic 32-bit CRC generation and checking
- Automatic payload padding and pad removal
- Loop-back modes
- One 48-bit perfect address
- 64 hash-filtered multicast addresses
- Pass all multicast
- Promiscuous mode
- Inverse filtering
- Pass all incoming with status report
- Wakeup packet support
- Auto-negotiation
- Automatic polarity detection and correction
- Supports HP Auto-MDIX
- Supports energy-detect power down
- Support for 3 status LEDs
- Receive and transmit TCP checksum offload
- PCI Local Bus Specification Revision 3.0 compliant
- 32-bit/33-MHz PCI bus
- Descriptor based scatter-gather DMA enables zero-copy drivers
- Supports PCI Bus Power Management Interface Specification, Revision 1.1
- Supports optional wake from D3cold (via configuration strap option when Vaux is available)
- Wake on LAN
- Wake on link status change (energy detect)
- Magic packet wakeup
- 3 programmable GPIO pins
- 2 GPO pins
- Serial interface provided for EEPROM
- Used to store PCI and MAC address configuration values
- Big/Little/Mixed endian support for registers, descriptors, and buffers
- IRQ deassertion timer
- General purpose timer
- Integrated 1.8V regulator
- Available in 128-pin VTQFP RoHS Compliant package
- Available in commercial & industrial temperature ranges
Specifications
Comments | 10Base-T/100Base-TX Ethernet Controller with PCI interface | Ethernet Bandwidth | 10/100Mbps |
TX/RX RAM Buffer(Bytes) | N/A | Interrupt Pin | 1 |
LEDs | 3 | Op. Voltage (V) | 0 |
# Ethernet Ports | 1 | Temp Range Min | -40 |
Temp Range Max | 85 | Max Speed | 33Mhz |
Mixed Endian | Yes | Checksum Offload | Yes |
# of Ether Ports | 0 | Fiber Support | No |
Interface | 32 bit PCI 3.0 | Supply voltage (V) | 0 |
Vdd I/O (V) | 3.3 | LinkMD Cable Diag | No |
ESD Rating (KV) | 0 | WOL | No |
Largets Pkt-Size Bytes | 0 | # of VLAN | 0 |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Availability: 3711 PCS
+BOMQty. | Unit Price | Ext. Price |
---|---|---|
1+ | $5.050 | $5.05 |
10+ | $4.421 | $44.21 |
30+ | $4.046 | $121.38 |
90+ | $3.386 | $304.74 |
540+ | $3.212 | $1,734.48 |
900+ | $3.133 | $2,819.70 |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for LAN9420I-NU, guaranteed quotes back within 12hr.
Top Sellers
-
KSZ9031RNXIC
Microchip
1040+ $2.460
-
LAN8742A-CZ-TR
Microchip
LAN8742A-CZ-TR: VQFN-24 Package Design
-
KSZ9031RNXIA
Microchip
Single-channel data transfer
-
RTC6705
Microchip
5.8GHz FM Transmitter
-
KSZ9131RNXI
Microchip
1 Port Ethernet Physical Layer Transceiver with 10/100/1000 Mbps in a 48-Pin VQFN EP package