This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

LAN9215-MT

10/100 Base-T/TX Ethernet Controller with 16 Bit/MII Interface.

LAN9215-MT General Description

The LAN9215(i) is a full-featured, single-chip 10/100 Ethernet controller designed for embedded applications where performance, flexibility, ease of integration and system cost control are required. The LAN9215(i) has been architected to provide the best price-performance ratio for any 16-bit application with medium performance requirements. The LAN9215(i) is fully IEEE 802.3 10BASE-T and 802.3u 100BASE-TX compliant, and supports HP Auto-MDIX.

The LAN9215(i) includes an integrated Ethernet MAC and PHY with a high-performance SRAM-like slave interface. The simple, yet highly functional host bus interface provides a glue-less connection to most common 16-bit microprocessors and microcontrollers as well as 32-bit microprocessors with a 16-bit external bus. The LAN9215(i) includes large transmit and receive data FIFOs to accommodate high latency applications. In addition, the LAN9215(i) memory buffer architecture allows the most efficient use of memory resources by optimizing packet granularity.

The 93AA46AE48 EEPROM device from Microchip comes with a factory programmed, globally unique EUI-48™ MAC Address. This Ethernet controller will automatically detect and load the EUI-48™ node address from the 93AA46AE48 EEPROM at start-up or reset.

*The LANCheck online design review service is subject to Microchip's Program Terms and Conditions and requires a myMicrochip account.

lan9215-mt lan9215-mt

Key Features

    • Optimized for medium performance applications
    • Efficient architecture with low CPU overhead
    • Easily interfaces to most 16-bit embedded CPU's
    • Integrated PHY with HP Auto-MDIX Support
    • Supports audio & video streaming over Ethernet: multiple standard-definition (SD) MPEG2 streams
    • Compatible with other members of LAN9218 family
    • Basic cable, satellite, and IP set-top boxes
    • Digital video recorders
    • Video-over IP solutions, IP PBX & video phones
    • Wireless routers & access points
    • Audio distribution systems
    • Printers, kiosks, security systems
    • General embedded applications
    • 16-bit interface
    • Burst-mode read support
    • External MII interface
    • Internal buffer memory can store over 200 packets
    • Automatic PAUSE and back-pressure flow control
    • Supports Slave-DMA
    • Interrupt Pin with Programmable Hold-off timer
    • Reduces system cost and increases design flexibility
    • SRAM-like interface easily interfaces to most Embedded CPU's or SoC's
    • Numerous power management modes
    • Wake on LAN*
    • Magic packet wakeup*
    • Wakeup indicator event signal
    • Link Status Change
    • Fully compliant with IEEE 802.3/802.3u standards
    • Integrated Ethernet MAC and PHY
    • 10BASE-T and 100BASE-TX support
    • Full- and Half-duplex support
    • Full-duplex flow control
    • Backpressure for half-duplex flow control
    • Preamble generation and removal
    • Automatic 32-bit CRC generation and checking
    • Automatic payload padding and pad removal
    • Loop-back modes
    • One 48-bit perfect address
    • 64 hash-filtered multicast addresses
    • Pass all multicast
    • Promiscuous mode
    • Inverse filtering
    • Pass all incoming with status report
    • Disable reception of broadcast packets
    • Supports HP Auto-MDIX
    • Auto-negotiation
    • Supports energy-detect power down
    • Simple, SRAM-like interface
    • 16-bit data bus
    • 16Kbyte FIFO with flexible TX/RX allocation
    • One configurable host interrupt
    • Low-profile 100-pin TQFP, or 100-ball LFBGA (LAN9215) RoHS Compliant package
    • Integrated 1.8V regulator
    • General Purpose Timer
    • Optional EEPROM interface
    • Support for 3 status LEDs multiplexed with Programmable GPIO signals
    • Single 3.3V Power Supply with 5V tolerant I/O
    • Commercial and Industrial (LAN9215i) Temperature Support
lan9215-mt

Specifications

Product Category Interface - Controllers Series -
Product Ethernet Controllers Packaging Tray
Unit-Weight 0.023175 oz Mounting-Style SMD/SMT
Operating-Temperature 0°C ~ 70°C Function Controller
Interface Parallel Voltage-Supply 3.3V
Current-Supply 40mA Protocol Ethernet
Standards 10/100 Base-T/TX PHY Data-Rate 10 Mb/s 100 Mb/s
Maximum-Operating-Temperature + 70 C Minimum-Operating-Temperature 0 C
Operating-Supply-Voltage 3.3 V to 5 V Standard 10Base-T 100Base-TX
Interface-Type MII Supply-Current-Max 69 mA
Supply-Voltage-Max 5 V Supply-Voltage-Min 3.3 V
Number-of-Transceivers 1 Transceiver Tags LAN9215-M, LAN9215, LAN921, LAN92, LAN9, LAN

Service Policies and Others

After-Sales & Settlement Related

payment Payment

Payment Method

hsbc
TT/Wire Transfer
paypal
Paypal
wu
Western Union
mg
Money Gram

For alternative payment channels, please reach out to us at:

[email protected]
shipping Shipping & Packing

Shipping Method

fedex
Fedex
ups
UPS
dhl
DHL
tnt
NTN
Packing

AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.

Warranty Warranty

We promise to provide 365 days quality assurance service for all our products.

Ratings and Reviews

More
S
S**n 07/08/2022

The product is delivered on time. i recommend the seller

10
J
J**n 09/03/2021

The parcel came for a month. Quality is good

2
I
I**h 08/25/2021

Unrealistically fast delivery for ali!!! 5 days! I'm in ahu

4
A
A**l 03/01/2021

All norms, waited for a short time

18

Reviews

You need to log in to reply. Sign In | Sign Up

Availability: 5940 PCS

+BOM
Qty. Unit Price Ext. Price
1+ - -

The prices below are for reference only.