This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

KSZ8842-PMBL-TR

Ethernet Switch 10/100 Base-T/TX PHY PCI Interface 100-LFBGA (9x9)

Manufacturer:

Microchip Technology, Inc
Mfr.Part #:

KSZ8842-PMBL-TR
Datasheet:

KSZ8842-PMBL-TR Datasheet (PDF)
Programmable:

Not Verified
Protocol:

Ethernet
Function:

Switch
Interface:

PCI
EDA/CAD Models:

Request Free CAD Models for KSZ8842-PMBL-TR

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

KSZ8842-PMBL-TR General Description

The KSZ8842-series of 2-port switches includes PCI and non-PCI CPU interfaces.

The datasheet describes the KSZ8842-PMQL/PMBL PCI CPU interface chips. KSZ8842-PMQL is PQFP package chip, KSZ8842-PMBL is LFBGA package chip. For information on the KSZ8842-MQL/MBL CPU non-PCI interface switches, refer to the KSZ8842-MQL/MBL datasheet.

The KSZ8842-PMQL/PMBL is the industry's first fully managed 2-port switch with a 32-bit/33MHz PCI processor interface. It is a proven, 4th generation, integrated Layer 2 switch that is compliant with the IEEE 802.3u standard. An industrial temperature grade version of the KSZ8842-PMQL/PMBL, also can be ordered the KSZ8842-PMQLI/PMBL AM.The KSZ8842-PMQL/PMBL can be configured as a switch or as a low-latency (<310 nanoseconds) repeater in latency-critical, embedded or industrial Ethernet applications.

For industrial automation applications, theKSZ8842-PMQL/PMBL can run in half-duplex mode regardless of the application. The KSZ8842-PMQL/PMBL offers an extensive feature set that includes tag/port-based VLAN, quality of service (QoS) priority management, management information base (MIB) counters, and CPU control/data interfaces to effectively address Fast Ethernet applications.The KSZ8842-PMQL/PMBL contains two 10/100 transceivers with patented, mixed-signal, low-power technology three media access control (MAC) units, a direct memory access (DMA) channel, a high-speed, non-blocking, switch fabric, a dedicated 1K entry forwarding table, and an on-chip frame buffer memory.

Microchip's complimentary and confidential LANCheck® online design review service is available for customers who have selected our products for their application design-in. The LANCheck online design review service is subject to Microchip's Program Terms and Conditions and requires a myMicrochip account.

Key Features

Non-blocking switch fabric assures fast packet delivery by utilizing a 1K entry MAC Address look-up engine and a store-and-forward architecture
Fully compliant with IEEE 802.3u standards
Full-duplex IEEE 802.3x flow control (Pause) with force mode option
Half-duplex back pressure flow control
IEEE 802.1Q VLAN support for up to 16 groups (full-range of VLAN IDs)
VLAN ID tag/untag options, per port basis
IEEE 802.1p/Q tag insertion or removal on a per-port basis (egress)
Programmable rate limiting at the ingress and egress port
Broadcast storm protection
IEEE 802.1d spanning tree protocol support
MAC filtering function to filter unicast packets
Unknown MAC address forwarding function
Direct forwarding mode enabling the processor to identify the ingress port and to specify the egress port
IGMP v1/v2 snooping support for multicast packet filtering
IPV6 Multicast Listener Discovery (MLD) snooping support
Management information base (MIB) counters for fully compliant statistics gathering: 32 MIB counters per port
Loop back modes for remote failure diagnostics
There are three kinds of register groups:
The PCI configuration registers are used to initialize and configure the PCI interface
The PCI control/status registers are used to communicate between the host and KSZ8842-PMQL/PMBL
Switch registers are used to support transceiver control and status. They are configurable on-the-fly (port-priority, 802.1p/d/Q, etc.)
Per port, 802.1p and DiffServ based
Re-mapping of 802.1p priority field on a per port basis
Full-chip hardware power-down (register configuration not saved) provides for low power dissipation
Per port-based software power-save on PHY (idle link detection, register configuration preserved)
Single power supply: 3.3V
Commercial Temperature Range: 0°C to +70°C
Industrial Temperature Range: -40°C to +85°C
Available in 128-pin PQFP and 100-ball LFBGA

Microchip Technology, Inc Original Stock

Specifications

Category	Integrated Circuits (ICs)InterfaceControllers	Series	-
Programmable	Not Verified	Protocol	Ethernet
Function	Switch	Interface	PCI
Standards	10/100 Base-T/TX PHY	Voltage - Supply	3.1V ~ 3.5V
Current - Supply	122mA	Operating Temperature	-40°C ~ 85°C
Base Product Number	KSZ8842