This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

JM38510/10901BPA

Precision Timer

Manufacturer:

TI
Mfr.Part #:

JM38510/10901BPA
Datasheet:

JM38510/10901BPA Datasheet (PDF)
Pbfree Code:

Yes
Part Life Cycle Code:

Active
Pin Count:

8
Reach Compliance Code:

not_compliant
EDA/CAD Models:

Request Free CAD Models for JM38510/10901BPA

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

JM38510/10901BPA General Description

These devices are precision timing circuits capable of producing accurate time delays or oscillation. In the time-delay or mono-stable mode of operation, the timed interval is controlled by a single external resistor and capacitor network. In the a-stable mode of operation, the frequency and duty cycle can be controlled independently with two external resistors and a single external capacitor.

The threshold and trigger levels normally are two-thirds and one-third, respectively, of V_CC. These levels can be altered by use of the control-voltage terminal. When the trigger input falls below the trigger level, the flip-flop is set, and the output goes high. If the trigger input is above the trigger level and the threshold input is above the threshold level, the flip-flop is reset and the output is low. The reset (RESET) input can override all other inputs and can be used to initiate a new timing cycle. When RESET goes low, the flip-flop is reset, and the output goes low. When the output is low, a low-impedance path is provided between discharge (DISCH) and ground.

The output circuit is capable of sinking or sourcing current up to 200 mA. Operation is specified for supplies of 5 V to 15 V. With a 5-V supply, output levels are compatible with TTL inputs.

Key Features

Timing From Microseconds to Hours
Astable or Monostable Operation
Adjustable Duty Cycle
TTL-Compatible Output Can Sink or Source
Up to 200 mA
On Products Compliant to MIL-PRF-38535,
All Parameters Are Tested Unless Otherwise Noted. On All Other Products, Production Processing Does Not Necessarily Include
Testing of All Parameters.

Specifications

Source Content uid	JM38510/10901BPA	Pbfree Code	Yes
Part Life Cycle Code	Active	Pin Count	8
Reach Compliance Code	not_compliant	ECCN Code	EAR99
HTS Code	8542.33.00.01	Additional Feature	CAN ALSO OPERATE FROM A 15V NOMINAL SUPPLY
Analog IC - Other Type	PULSE; RECTANGULAR	JESD-30 Code	R-GDIP-T8
JESD-609 Code	e0	Length	9.58 mm
Number of Functions	1	Number of Terminals	8
Operating Temperature-Max	125 °C	Operating Temperature-Min	-55 °C
Peak Reflow Temperature (Cel)	NOT SPECIFIED	Qualification Status	Not Qualified
Screening Level	MIL-M-38510	Seated Height-Max	5.08 mm
Supply Current-Max (Isup)	15 mA	Supply Voltage-Max (Vsup)	18 V
Supply Voltage-Min (Vsup)	4.5 V	Supply Voltage-Nom (Vsup)	5 V
Surface Mount	NO	Temperature Grade	MILITARY
Terminal Finish	Tin/Lead (Sn/Pb)	Terminal Form	THROUGH-HOLE
Terminal Pitch	2.54 mm	Terminal Position	DUAL
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED	Width	7.62 mm