Payment Method
JANTX2N4857
Trans JFET N-CH 3-Pin TO-206AA
-
Manufacturer:
-
Mfr.Part #:
JANTX2N4857
-
Datasheet:
-
FET Type:
N-Channel
-
Voltage - Breakdown (V(BR)GSS):
40 V
-
Drain to Source Voltage (Vdss):
40 V
-
Current - Drain (Idss) @ Vds (Vgs=0):
100 mA @ 15 V
-
EDA/CAD Models:
Availability: 5993 PCS
Please fill in the short form below and we will provide you the quotation immediately.
JANTX2N4857 General Description
The JANTX2N4857 is a JFET transistor that operates as a voltage-controlled resistor. It is specifically designed for low-level signal amplification and switching applications.
Key Features
- N-Channel JFET: The JANTX2N4857 is an N-channel JFET, meaning it is a three-terminal device with a gate, drain, and source. It allows current to flow between the drain and source terminals when a voltage is applied to the gate terminal.
- Low Noise: It offers low noise performance, making it suitable for applications where signal fidelity is critical.
- High Input Impedance: The transistor has a high input impedance, allowing it to interface with high impedance signal sources without significant loading effects.
- Low Leakage Current: It has low leakage current, which helps in maintaining signal integrity in applications with low-level signals.
- Wide Operating Temperature Range: The transistor is designed to operate over a wide temperature range, making it suitable for various environmental conditions.
Application
The JANTX2N4857 transistor can be used in a variety of applications, including low-noise amplifiers, audio signal amplification, high-impedance preamplifiers, analog switches, and voltage-controlled resistors.
Specifications
Category | Discrete Semiconductor ProductsTransistorsJFETs | Series | - |
FET Type | N-Channel | Voltage - Breakdown (V(BR)GSS) | 40 V |
Drain to Source Voltage (Vdss) | 40 V | Current - Drain (Idss) @ Vds (Vgs=0) | 100 mA @ 15 V |
Voltage - Cutoff (VGS off) @ Id | 6 V @ 500 pA | Input Capacitance (Ciss) (Max) @ Vds | 18pF @ 10V (VGS) |
Resistance - RDS(On) | 40 Ohms | Power - Max | 360 mW |
Operating Temperature | -65°C ~ 200°C (TJ) | Mounting Type | Through Hole |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Availability: 5993 PCS
+BOMQty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for JANTX2N4857, guaranteed quotes back within 12hr.
Top Sellers
-
APT10026JN
microchip
Trans MOSFET N-CH 1KV 33A 4-Pin SOT-227
-
JANTX2N2329
MICROCHIP
SCR 400V 15A 3-Pin TO-5
-
APT20GF120SRDQ1G
Microchip Technology, Inc
Trans IGBT Chip N-CH 1200V 36A 200W 3-Pin(2+Tab) D3PAK
-
HUM2020 B
Microchip Technology, Inc
Diode PIN Switch 2KV 2-Pin Style B
-
80-MS1076C
Microchip Technology, Inc
Trans RF BJT NPN 35V 16A 25000mW 4-Pin Case M-174
thanks. hopefully later I can create some great stuff with those sensors. not much to say about it at this moment