Payment Method
ISOS141FDBQSEP
Radiation tolerant quad-channel, 3/1 digital isolator in space enhanced plastic
-
Manufacturer:
-
Mfr.Part #:
ISOS141FDBQSEP
-
Datasheet:
-
Technology:
Capacitive Coupling
-
Type:
CAN, RS422, RS485, SPI
-
Isolated Power:
No
-
Number of Channels:
4
-
EDA/CAD Models:
Availability: 4886 PCS
Please fill in the short form below and we will provide you the quotation immediately.
ISOS141FDBQSEP General Description
The ISOS141-SEP radiation-tolerant device is a high-performance, quad-channel digital isolator in a small form factor 16-pin QSOP package. Each isolation channel has a logic input and output buffer separated by a double capacitive silicon dioxide (SiO2) insulation barrier. This device supports low Earth orbit (LEO) space applications with its high data rate of 100 Mbps, low propagation delay of 10.7 ns, and tight channel-to-channel skew of 4 ns. The ISOS141-SEP device has three forward and one reverse-direction channels and if the input power or signal is lost, the default output is low. The enable pins can be used to put the respective outputs in high impedance for multi-master driving applications and to reduce power consumption.
The ISOS141-SEP provides high electromagnetic immunity and low emissions with low power consumption, while isolating CMOS or LVCMOS digital I/Os. The device has a high common-mode transient immunity of 100 kV/µs and can ease system-level ESD, EFT, surge, and simplify emissions compliance through its innovative chip design.
Key Features
- Radiation Tolerant
- Total Ionizing Dose (TID) Characterized (ELDRS-Free) = 30 krad(Si)
- TID RLAT/RHA = 30 krad(Si)
- Single-Event Latch-up (SEL) Immune to LET = 43 MeV⋅cm2/mg at 125°C
- Single-Event Dielectric Rupture (SEDR) Immune (43 MeV⋅cm2/mg) at 500 VDC
- Space Enhanced Plastic (Space EP)
- Meets NASA’s ASTM E595 Outgassing Spec
- Vendor Item Drawing (VID) V62/21610
- Military Temp Range (-55°C to 125°C)
- One Wafer Fabrication Site
- One Assembly and Test Site
- Gold Bond Wire, NiPdAu Lead Finish
- Wafer Lot Traceability
- Extended Product Life Cycle
- Extended Product Change Notification
- 600 VRMS continous working voltage
- Section 6.7:
- DIN VDE V 0884-11:2017-01
- UL 1577 component recognition program
- 100 Mbps data rate
- Wide supply range: 2.25 V to 5.5 V
- 2.25-V to 5.5-V level translation
- Default output low
- Low power consumption, 1.5 mA per channel typical at 1 Mbps
- Low propagation delay: 10.7 ns typical (5-V Supplies)
- Low channel-to-channel skew: 4 ns max (5-V Supplies)
- ±100 kV/µs typical CMTI
- System-level ESD, EFT, Surge, and Magnetic Immunity
-
Small QSOP (DBQ-16) package
Specifications
Category | IsolatorsDigital Isolators | Series | - |
Technology | Capacitive Coupling | Type | CAN, RS422, RS485, SPI |
Isolated Power | No | Number of Channels | 4 |
Inputs - Side 1/Side 2 | 3/1 | Channel Type | Unidirectional |
Voltage - Isolation | 3000Vrms | Common Mode Transient Immunity (Min) | 100kV/µs |
Data Rate | 100Mbps | Propagation Delay tpLH / tpHL (Max) | 16ns, 16ns |
Pulse Width Distortion (Max) | 4.9ns | Rise / Fall Time (Typ) | 2.4ns, 2.4ns |
Voltage - Supply | 2.25V ~ 5.5V | Operating Temperature | -55°C ~ 125°C |
Mounting Type | Surface Mount | Base Product Number | ISOS141 |
Rating | Space | Integrated isolated power | No |
Isolation rating | Basic | Number of channels | 4 |
Forward/reverse channels | 3 forward / 1 reverse | Default output | High, Low |
Data rate (max) (MBps) | 100 | Surge isolation voltage (VIOSM) (VPK) | 5200 |
Transient isolation voltage (VIOTM) (VPK) | 4242 | Withstand isolation voltage (VISO) (Vrms) | 3000 |
CMTI (min) (V/µs) | 85000 | Operating temperature range (°C) | -55 to 125 |
Supply voltage (max) (V) | 5.5 | Supply voltage (min) (V) | 2.25 |
Propagation delay time (typ) (µs) | 0.0107 | Current consumption per channel (DC) (typ) (mA) | 0.88 |
Current consumption per channel (1 Mbps) (typ) (mA) | 1.48 | Creepage (min) (mm) | 3.7 |
Clearance (min) (mm) | 3.7 | feature-number-of-channels-per-chip | 4 |
feature-maximum-data-rate | 100Mbps | feature-maximum-rise-time-ns | |
feature-maximum-fall-time-ns | feature-minimum-pulse-width-ns | ||
feature-maximum-pulse-width-distortion-ns | feature-minimum-operating-supply-voltage-v | 2.25 | |
feature-maximum-propagation-delay-skew-ns | feature-output-type | ||
feature-maximum-operating-supply-voltage-v | 5.5 | feature-maximum-propagation-delay-time-tphl-ns | |
feature-maximum-propagation-delay-time-tplh-ns | feature-maximum-quiescent-supply-current-ma | ||
feature-maximum-power-dissipation-mw | feature-packaging | ||
feature-rad-hard | feature-pin-count | ||
feature-cecc-qualified | feature-esd-protection | ||
feature-military | feature-aec-qualified | ||
feature-aec-qualified-number | feature-eccn-code | EAR99 | |
feature-svhc | feature-svhc-exceeds-threshold |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Availability: 4886 PCS
+BOMQty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for ISOS141FDBQSEP, guaranteed quotes back within 12hr.
Top Sellers
-
SN65HVD230DR
TI
1000+ $0.403
-
SN75176BP
TI
1000+ $0.309
-
PCF8574AN
TI
8-bit 2.5- to 5.5-V I2C/SMBus I/O expander with interrupt
-
MAX232N
Texas Instruments, Inc
2/2 Transceiver Full RS232 16-PDIP
-
TCA6424RGJR
Texas Instruments, Inc
24-bit translating 1.65- to 5.5-V I2C/SMBus I/O expander with interrupt, reset & config registers
Order received delivery fast! All as in the description of the details came whole. Seller recommend!!