This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

HSCDRRN002NDAA3

Pressure Sensor -2inH2O to 2inH2O Differential 8-Pin DIP Module

Manufacturer:

Honeywell
Mfr.Part #:

HSCDRRN002NDAA3
Datasheet:

HSCDRRN002NDAA3 Datasheet (PDF)
Pressure Type:

Differential
Operating Pressure:

2 in H2O
Accuracy:

1.5 %
Output Type:

Analog
EDA/CAD Models:

Request Free CAD Models for HSCDRRN002NDAA3

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

HSCDRRN002NDAA3 General Description

TruStability™ HSC Series-High Accuracy, analog, 0x28, DIP RR: dual radial barbed ports, same side, differential, ±2 inH2O, 3.3 Vdc, no special options The TruStability™ High Accuracy Silicon Ceramic (HSC) Series is a piezoresistive silicon pressure sensor offering a ratiometric analog or digital output for reading pressure over the specified full scale pressure span and temperature range. The HSC Series is fully calibrated and temperature compensated for sensor offset, sensitivity, temperature effects, and nonlinearity using an on-board Application Specific Integrated Circuit (ASIC). Calibrated output values for pressure are updated at approximately 1 kHz for analog and 2 kHz for digital. The HSC Series is calibrated over the temperature range of 0 °C to 50 °C [32 °F to 122 °F]. The sensor is characterized for operation from a single power supply of either 3.3 Vdc or 5.0 Vdc. These sensors measure absolute, gage, or differential pressures. The absolute versions have an internal vacuum reference and an output value proportional to absolute pressure. Gage versions are referenced to atmospheric pressure and provide an output proportional to pressure variations from atmosphere. Differential versions allow measurement of pressure between the two pressure ports. The TruStability™ pressure sensors are intended for use with non-corrosive, non-ionic gases, such as air and other dry gases. Available options extend the performance of these sensors to non-corrosive, non-ionic liquids for pressure ranges above 40 mbar | 4 kPa | 20 inH2O. All products are designed and manufactured according to ISO 9001 standards.

Specifications

Product Category	Board Mount Pressure Sensors	Pressure Type	Differential
Operating Pressure	2 in H2O	Accuracy	1.5 %
Output Type	Analog	Mounting Style	Through Hole
Interface Type	-	Operating Supply Voltage	3.3 V
Port Type	Dual Radial Barbed, Same Side	Resolution	12 bit
Minimum Operating Temperature	0 C	Maximum Operating Temperature	+ 50 C
Series	HSC	Tradename	TruStability
Operating Supply Current	3.1 mA	Port Size	1.93 mm
Product Type	Pressure Sensors	Factory Pack Quantity	50
Subcategory	Sensors	Supply Voltage - Max	3.6 V
Supply Voltage - Min	3 V	Unit Weight	0.035274 oz