This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

HS1B-0547RH/PROTO

Multiplexer Switch ICs RAD HARD DIFF 8 CHANNEL ANALOG MUX, PROTOTYPE

Manufacturer:

Renesas Electronics
Mfr.Part #:

HS1B-0547RH/PROTO
Datasheet:

HS1B-0547RH/PROTO Datasheet (PDF)
Series:

HS-0547RH
Product:

Multiplexers
Mounting Style:

Through Hole
Number of Channels:

16 Channel
EDA/CAD Models:

Request Free CAD Models for HS1B-0547RH/PROTO

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

HS1B-0547RH/PROTO General Description

The HS-0546RH and HS-0547RH are radiation hardened analog multiplexers with Active Overvoltage Protection and guaranteed r_ON matching. Analog input levels may greatly exceed either power supply without damaging the device or disturbing the signal path of other channels. Active protection circuitry assures that signal fidelity is maintained even under fault conditions that would destroy other multiplexers. Analog inputs can withstand constant 70V peak-to-peak levels with ±15V supplies and digital inputs will sustain continuous faults up to 4V greater than either supply. In addition, signal sources are protected from short circuiting should multiplexer supply loss occur: each input presents 1kΩ of resistance under this condition. These features make the HS-0546RH and HS-0547RH ideal for use in systems where the analog inputs originate from external equipment or separately powered circuitry. Both devices are fabricated with 44V dielectrically isolated CMOS technology. The HS-0546 is a 16 channel device and the HS-0547 is an 8 channel differential version. If input overvoltage protection is not needed, the HS-0506 and HS-0507 multiplexers are recommended. Specifications for Rad Hard QML devices are controlled by the Defense Supply Center in Columbus (DSCC). The SMD numbers listed here must be used when ordering. Detailed Electrical Specifications for these devices are contained in SMD 5962-95693. A hot-link is provided on our homepage for downloading. http://www. intersil. com

Key Features

Electrically Screened to SMD # 5962-95693
QML Qualified per MIL-PRF-38535 Requirements
Gamma Dose 1 x 10⁴RAD(Si)
No Latch-Up
No Channel Interaction During Overvoltage
Guaranteed r_ON Matching
Maximum Power Supply 44V
Break-Before-Make Switch
Analog Signal Range ±15V
Access Time 1.0µs

Specifications

Product Category	Multiplexer Switch ICs	Series	HS-0547RH
Product	Multiplexers	Mounting Style	Through Hole
Number of Channels	16 Channel	Configuration	2 x 8:1
Supply Voltage - Max	44 V	Minimum Operating Temperature	- 55 C
Maximum Operating Temperature	+ 125 C	Dual Supply Voltage	+/- 15 V
Height	2.41 mm	Length	35.6 mm
Product Type	Multiplexer Switch ICs	Factory Pack Quantity	1
Subcategory	Switch ICs	Supply Type	Single Supply, Dual Supply
Width	15.1 mm