This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

HIP2103FRTAAZ

Half-Bridge Gate Driver IC Non-Inverting 8-TDFN (3x3)

Manufacturer:

Renesas Electronics
Mfr.Part #:

HIP2103FRTAAZ
Datasheet:

HIP2103FRTAAZ Datasheet (PDF)
Product:

Half-Bridge Drivers
Type:

High-Side, Low-Side
Mounting Style:

SMD/SMT
Number of Drivers:

2 Driver

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

HIP2103FRTAAZ General Description

The HIP2103 is a half-bridge driver designed for applications using DC motors, 3-phase brushless DC motors, or other similar loads. The two inputs (HI and LI) independently control the high-side driver (HO) and the low-side driver (LO). HI and LI can be configured to enable/disable the device, which lowers the number of connections to a microcontroller and the cost. The low I_DD bias current in the Sleep Mode prevents battery drain when the device is not in use, which eliminates the need for an external switch to disconnect the driver from the battery. Integrated pull-down resistors on all of the inputs (LI, HI, VDen, and VCen) reduce the need for external resistors. An active-low resistance pull-down on the LO output ensures that the low-side bridge FET remains off during the Sleep Mode or when V_DD is below the Undervoltage Lockout (UVLO) threshold.

Key Features

60V maximum bootstrap supply voltage
3.3V and 12V LDOs with dedicated enable pins (HIP2104)
5µA sleep mode quiescent current
V_DD undervoltage lockout
3.3V or 5V CMOS compatible inputs with hysteresis
Integrated bootstrap FET (replaces traditional bootstrap diode)
Available in an 8 Ld SOIC and 3x3mm TDFN packages
Pb-Free (RoHS Compliant)

Specifications

Product Category	Gate Drivers	Product	Half-Bridge Drivers
Type	High-Side, Low-Side	Mounting Style	SMD/SMT
Number of Drivers	2 Driver	Number of Outputs	2 Output
Output Current	150 mA	Supply Voltage - Min	4.5 V
Supply Voltage - Max	14 V	Rise Time	21 ns
Fall Time	17 ns	Minimum Operating Temperature	- 40 C
Maximum Operating Temperature	+ 125 C	Series	HIP2103
Height	0.75 mm	Length	3 mm
Maximum Turn-Off Delay Time	39 ns	Maximum Turn-On Delay Time	2.5 ms
Moisture Sensitive	Yes	Operating Supply Current	245 uA
Output Voltage	4 V	Pd - Power Dissipation	2.3 W
Product Type	Gate Drivers	Shutdown	Yes
Factory Pack Quantity	1000	Subcategory	PMIC - Power Management ICs
Technology	Si	Width	3 mm
Unit Weight	0.000776 oz