This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

HIP2100IBZT

Half-Bridge Gate Driver IC Non-Inverting 8-SOIC

Manufacturer:

Renesas Electronics
Mfr.Part #:

HIP2100IBZT
Datasheet:

HIP2100IBZT Datasheet (PDF)
Product:

Half-Bridge Drivers
Type:

High-Side, Low-Side
Mounting Style:

SMD/SMT
Number of Drivers:

2 Driver
EDA/CAD Models:

Request Free CAD Models for HIP2100IBZT

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

HIP2100IBZT General Description

The HIP2100 is a high frequency, 100V Half Bridge N-Channel power MOSFET driver IC. The low-side and high-side gate drivers are independently controlled and matched to 8ns. This gives the user maximum flexibility in dead-time selection and driver protocol. Undervoltage protection on both the low-side and high-side supplies force the outputs low. An on-chip diode eliminates the discrete diode required with other driver ICs. A new level-shifter topology yields the low-power benefits of pulsed operation with the safety of DC operation. Unlike some competitors, the high-side output returns to its correct state after a momentary undervoltage of the high-side supply.

Key Features

Drives N-Channel MOSFET Half Bridge
SOIC, EPSOIC, and QFN Package Options
SOIC and EPSOIC Packages Compliant with 100V Conductor Spacing Guidelines of IPC-2221
Pb-Free (RoHS Compliant)
Bootstrap Supply Max Voltage to 114V_DC
On-Chip 1Ω Bootstrap Diode
Fast Propagation Times for Multi-MHz Circuits
Drives 1000pF Load with Rise and Fall Times Typ 10ns
CMOS Input Thresholds for Improved Noise Immunity
Independent Inputs for Non-Half Bridge Topologies
No Start-Up Problems
Outputs Unaffected by Supply Glitches, HS Ringing Below Ground, or HS Slewing at High dv/dt
Low Power Consumption
Wide Supply Range
Supply Undervoltage Protection
3Ω Driver Output Resistance
QFN Package:
- Compliant to JEDEC PUB95 MO-220 QFN - Quad Flat No Leads - Package Outline
- Near Chip Scale Package Footprint, which Improves PCB Efficiency and has a Thinner Profile

Specifications

Product Category	Gate Drivers	Product	Half-Bridge Drivers
Type	High-Side, Low-Side	Mounting Style	SMD/SMT
Number of Drivers	2 Driver	Number of Outputs	2 Output
Output Current	2 A	Supply Voltage - Min	9 V
Supply Voltage - Max	14 V	Rise Time	500 ns
Fall Time	500 ns	Minimum Operating Temperature	- 40 C
Maximum Operating Temperature	+ 125 C	Series	HIP2100
Features	Independent	Height	0 mm
Length	4.9 mm	Maximum Turn-Off Delay Time	8 ns
Maximum Turn-On Delay Time	8 ns	Operating Supply Current	2.5 mA
Pd - Power Dissipation	1.3 W	Product Type	Gate Drivers
Propagation Delay - Max	35 ns	Factory Pack Quantity	2500
Subcategory	PMIC - Power Management ICs	Technology	Si
Width	3.9 mm	Unit Weight	0.002540 oz
Programmabe	Not Verified	Driven Configuration	Half-Bridge
Channel Type	Independent	Gate Type	N-Channel MOSFET
Voltage - Supply	9V ~ 14V	Logic Voltage - VIL, VIH	4V, 7V
Current - Peak Output (Source, Sink)	2A, 2A	Input Type	Non-Inverting
High Side Voltage - Max (Bootstrap)	114 V	Rise / Fall Time (Typ)	10ns, 10ns
Operating Temperature	-55°C ~ 150°C (TJ)	Mounting Type	Surface Mount
Base Product Number	HIP2100