This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

HI3-0509A-5Z

2 Circuit IC Switch 4:1 1.8kOhm 16-PDIP

Manufacturer:

Renesas Technology Corp
Mfr.Part #:

HI3-0509A-5Z
Datasheet:

HI3-0509A-5Z Datasheet (PDF)
Switch Circuit:

SP4T
Multiplexer/Demultiplexer Circuit:

4:1
Number of Circuits:

2
On-State Resistance (Max):

1.8kOhm
EDA/CAD Models:

Request Free CAD Models for HI3-0509A-5Z

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

HI3-0509A-5Z General Description

The HI-506A, HI-507A, HI-508A and HI-509A are analog multiplexers with active overvoltage protection. Analog input levels may greatly exceed either power supply without damaging the device or disturbing the signal path of other channels. Active protection circuitry assures that signal fidelity is maintained even under fault conditions that would destroy other multiplexers. Analog inputs can withstand constant 70V_P-P levels with ±15V supplies. Digital inputs will also sustain continuous faults up to 4V greater than either supply. In addition, signal sources are protected from short circuiting should multiplexer supply loss occur. Each input presents 1kΩ of resistance under this condition. These features make the HI-506A, HI-507A, HI-508A and HI-509A ideal for use in systems where the analog inputs originate from external equipment, or separately powered circuitry. All devices are fabricated with 44V dielectrically isolated CMOS technology. The HI-506A is a single 16-channel multiplexer, the HI-507A is an 8-channel differential multiplexer, the HI-508A is a single 8-channel multiplexer and the HI-509A is a differential 4-channel multiplexer. If input overvoltage protection is not needed the HI-506/507/508/509 multiplexers are recommended. For further information see Application Note AN520.

Key Features

Analog Overvoltage 70V_P-P
No Channel Interaction During Overvoltage
Maximum Power Supply 44V
Fail Safe with Power Loss (No Latch-Up)
Break-Before-Make Switching
Analog Signal Range ±15V
Access Time 500ns
Power Dissipation 7.5mW
Pb-Free Available (RoHS Compliant)

Specifications

Category	Integrated Circuits (ICs)InterfaceAnalog Switches, Multiplexers, Demultiplexers	Series	-
Switch Circuit	SP4T	Multiplexer/Demultiplexer Circuit	4:1
Number of Circuits	2	On-State Resistance (Max)	1.8kOhm
Channel-to-Channel Matching (ΔRon)	-	Voltage - Supply, Single (V+)	-
Voltage - Supply, Dual (V±)	±15V	Switch Time (Ton, Toff) (Max)	300ns, 300ns (Typ)
-3db Bandwidth	-	Charge Injection	-
Channel Capacitance (CS(off), CD(off))	10pF, 12pF	Current - Leakage (IS(off)) (Max)	30pA (Typ)
Crosstalk	-	Operating Temperature	0°C ~ 75°C (TA)
Mounting Type	Through Hole	Base Product Number	HI3-0509