This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

HD3SS460RNHR

4x6-channel USB Type-C™ Alternate Mode mux/demux

Manufacturer:

Texas Instruments, Inc
Mfr.Part #:

HD3SS460RNHR
Datasheet:

HD3SS460RNHR Datasheet (PDF)
Type:

Passive mux
Function:

Type-C, USB 3.0
USB speed (MBits):

5000
Number of channels:

4
EDA/CAD Models:

Request Free CAD Models for HD3SS460RNHR

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

HD3SS460RNHR General Description

The HD3SS460 is a high-speed bi-directional passive switch in mux or demux configurations. Based on control pin POL the device provides switching to accommodate connector flipping. The device also provides muxing between 2Ch Data / 2Ch Video and all 4Ch Video based on control pin AMSEL.

The device also provides cross points MUX for low speed pins as needed in flippable connector implementation.

The HD3SS460 is a generic analog differential passive switch that can work for any high speed interface applications as long as it is biased at a common mode voltage range of 0-2V and has differential signaling with differential amplitude up to 1800mVpp. It employs an adaptive tracking that ensures the channel remains unchanged for entire common mode voltage range.

Excellent dynamic characteristics of the device allow high speed switching with minimum attenuation to the signal eye diagram with very little added jitter. It consumes <2 mW of power when operational and <5µW in shutdown mode, exercisable by EN pin.

Key Features

Provides MUX Solution for USB Type-C™ Ecosystem Including Alternate Mode (AM)
Provides Wide Channel Selection Choices Including USBSS and 2 Ch AM, 4 Ch AM
Compatible with 5 Gbps USB3.1 Gen 1 and AM Including 5.4 Gbps DisplayPort 1.2a
Compatible for Source/Host and Sink/Device Applications
Provides Cross-point MUX for Low Speed SBU Pins
Bidirectional "Mux/De-Mux" Differential Switch
Supports Common Mode Voltage 0-2 V
Low Power with 1-µA Shutdown and 0.6 mA Active
Single Supply Voltage VCC of 3.3 V ±10%
Industrial Temperature Range of –40 to 85°C

Specifications

Type	Passive mux	Function	Type-C, USB 3.0
USB speed (MBits)	5000	Number of channels	4
Supply voltage (max) (V)	3.6	Supply voltage (min) (V)	3
Ron (typ) (mΩ)	8000	Input/output voltage (min) (V)	0
Input/output voltage (max) (V)	2	Configuration	4:6
Features	Crosspoint, Logic Controlled (Output Enabled), USB 3.1 (Type-C)	Rating	Catalog
Operating temperature range (°C)	-40 to 85, 0 to 70	Supply current (max) (µA)	900
ESD HBM (typ) (kV)	4	Bandwidth (MHz)	2700
feature-type	Programmable USB Controller	feature-usb-transceiver	No
feature-usb-speed-type	High Speed\|Low Speed	feature-maximum-data-rate-mbps	5400
feature-maximum-operating-frequency-mhz		feature-protocols-supported	USB 3.1
feature-process-technology		feature-interface-type
feature-minimum-operating-supply-voltage-v	3	feature-maximum-operating-supply-voltage-v	3.6
feature-packaging	Tape and Reel	feature-pin-count	30
feature-cecc-qualified		feature-esd-protection
feature-military	No	feature-aec-qualified	No
feature-aec-qualified-number		feature-eccn-code	EAR99
feature-svhc	No	feature-svhc-exceeds-threshold	No