This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

GN2010EAINE3 +BOM

Ethernet, Fibre Channel, SONET/SDH IC 11.7Gbps 2 Output 32-QFN

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

Ethernet, Fibre Channel, SONET/SDH IC 11.7Gbps 2 Output 32-QFN

Dual CDR with 8.5Gb/s, 9.95-11.3Gb/s and 10.3-11.7Gb/s reference-free operation
Integrated laser bias and driver for electo-absorption modulators (EAMs) and modulated lasers (EMLs)
Integrated limiting amplifier with sensitivity less than 7mV
Digital control through I2C or SPI interface
Programmable Jitter Transfer bandwidth
Supports Automatic Power Control (APC) loop
Bi-directional loopback
Polarity invert and output available in both transmit and receive direction
Programmable Rx output de-emphasis
Programmable Tx output pre-emphasis
Mission-mode eye monitor
PRBS Generator and Checker
Programmable Limiting Amplifier Equalization
Programmable Transmit Input Equalization
Programmable Input Slice Level Adjust
Programmable LOS with adjustable threshold and hysteresis
Programmable Sampling Phase Adjust
Programmable Tx Fault signalling
Integrated analog to digital converter, which provides access to digital diagnostic information on supply voltage, die temperature, and transmit optical power
Single 3.3V supply (+5%/-10%)
Integrated laser safety features
5x5 32-pin QFN package
Laser bias current up to 120mA
Option for source or sink bias current
Modulation swing of up to 2.5Vpp single-ended
2x 50? single-ended terminations
Transmitter disable pin
Crossing point adjustment
Independently programmable rise and fall de-emphasis
Jitter Optimization with Phase Adjust feature
Optional on-chip APC loop
Programmable Tx Fault signalling
Programmable peaking control

Category	Integrated Circuits (ICs)Clock/TimingApplication Specific Clock/Timing	Series	-
Programmable	Not Verified	PLL	-
Main Purpose	Ethernet, Fibre Channel, SONET/SDH	Input	-
Output	-	Number of Circuits	2
Ratio - Input:Output	-	Differential - Input:Output	-
Frequency - Max	11.7Gbps	Voltage - Supply	3.3V
Operating Temperature	-	Mounting Type	Surface Mount
Base Product Number	GN2010	Product Category	Clock Generators & Support Products
Type	Clock and Data Recovery	Number of Outputs	2 Output
Operating Supply Voltage	3.3 V	Minimum Operating Temperature	- 40 C
Maximum Operating Temperature	+ 95 C	Mounting Style	SMD/SMT
Moisture Sensitive	Yes	Product Type	Clock Generators
Factory Pack Quantity	490	Subcategory	Clock & Timer ICs
Supply Voltage - Max	3.465 V	Supply Voltage - Min	2.805 V