Payment Method
GN1157-INTE3Z
Laser Driver IC 11.3Gbps Channel 3.3V 28-QFN (4x4)
-
Manufacturer:
-
Mfr.Part #:
GN1157-INTE3Z
-
Datasheet:
-
Type:
Laser Diode Driver (Fiber Optic)
-
Data Rate:
11.3Gbps
-
Voltage - Supply:
3.3V
-
Current - Modulation:
90mA
-
EDA/CAD Models:
Availability: 3104 PCS
Please fill in the short form below and we will provide you the quotation immediately.
GN1157-INTE3Z General Description
Laser Driver IC 11.3Gbps Channel 3.3V 28-QFN (4x4)
Key Features
- Power Dissipation 185mW typical (IBIAS = 0 mA, IMOD = 0mAppd)
- DFB/FP Laser Driver:
- Maximum bias current = 120mA
- Maximum modulation current into 15? differential TOSA = 92mApp
- Tx DJ = 5pspp; Tx RJ = 0.5psrms
- Integrated closed-loop Automatic Power Control (APC)
- Compatible with microcontroller-based modulation current/temperature look-up table
- Programmable Tx eye shaping features and input equalization
- Programmable rise/fall times
- Laser safety features
- Switchable Tx polarity invert
- Limiting Amplifier Receiver:
- Rx sensitivity at 11.317Gb/s = 5mVppd
- Rx DJ = 4pspp, Rx RJ = 0.7psrms
- Programmable bandwidth
- Rx output pre-emphasis and squelch
- Programmable Rx output swing
- Programmable rise/fall times
- Adjustable loss of signal detect threshold
- Switchable Rx polarity invert
- Measurement of digital diagnostic and monitoring parameters
- 2-wire serial interface for host communication
- Software-selectable power-down modes
- 3.3V or 2.5V CMOS inputs and open-drain outputs for control and status lines
Application
- This specification defines a multi-rate transceiver IC for use in a wide range of LR Ethernet and Fibre Channel applications from 1.0Gbps to 11.3Gbps. This includes 1Gbps and 10Gbps Ethernet data rates as defined by IEEE 802.3 and 1,2,4,8 and 10Gbps Fibre Channel data rates.
- Packaging
- 28-pin 4mm x 4mm QFN
- Order Codes
- GN1157-INE3
- GN1157-INTE3Z - Tape and Reel, 2500/reel
Specifications
Category | Integrated Circuits (ICs)Power Management (PMIC)Laser Drivers | Series | - |
Type | Laser Diode Driver (Fiber Optic) | Data Rate | 11.3Gbps |
Voltage - Supply | 3.3V | Current - Modulation | 90mA |
Current - Bias | 120 mA | Operating Temperature | - |
Mounting Type | Surface Mount | Base Product Number | GN1157 |
Product Category | Laser Drivers | Operating Supply Voltage | 3.3 V |
Operating Supply Current | 120 mA | Mounting Style | SMD/SMT |
Pd - Power Dissipation | 185 mW | Product Type | Laser Drivers |
Factory Pack Quantity | 2500 | Subcategory | Driver ICs |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Availability: 3104 PCS
+BOMQty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for GN1157-INTE3Z, guaranteed quotes back within 12hr.