This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

FT232HQ-REEL +BOM

Full Speed/High Speed USB Interface Device USB 2.0 3.3V T/R 48-Pin QFN EP

Manufacturer:

FTDI, Future Technology Devices International Ltd
Mfr.Part #:

FT232HQ-REEL
Datasheet:

FT232HQ-REEL Datasheet (PDF)
Programmabe:

Not Verified
Protocol:

USB
Function:

Bridge, USB to UART,FIFO
Interface:

UART, FIFO
EDA/CAD Models:

Request Free CAD Models for FT232HQ-REEL

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

FT232HQ-REEL General Description

INTERFACE, USB - UART/FIFO, 48QFN; Bridge Type: USB to UART, FIFO; Supply Voltage Min: 2.97V; Supply Voltage Max: 3.63V; Interface Case Style: QFN; No. of Pins: 48Pins; Operating Temperature Min: -40°C; Operating Temperature Max: 85°C; Product Range: -; Automotive Qualification Standard: -; MSL: -; SVHC: No SVHC (15-Jan-2019); IC Generic Number: 232

Key Features

Single channel USB to serial/parallel ports with a variety of configurations
Entire USB protocol handled on chip, no USB specific firmware programming required
USB 2.0 high-speed (480Mbps) and full-speed (12Mbps) compatible
Multi-protocol synchronous serial engine (MPSSE) to simplify synchronous serial protocol design
UART transfer data rate up to 12Mbaud (RS232 data rate limited by external level shifter)
USB to asynchronous 245 FIFO mode for transfer data rate up to 8Mbps
USB to synchronous 245 parallel FIFO mode for transfers up to 40Mbps
Supports a half duplex FT1248 interface with a configurable width, bi-directional data bus
CPU-style FIFO interface mode simplifies CPU interface design
Fast serial interface option
FTDI's royalty-free virtual com port (VCP) and direct (D2XX) drivers
Adjustable receive buffer timeout
Option for transmit and receive LED drive signals
Bit-bang mode interface option with RD# and WR strobes
Highly integrated design includes 5 to 3.3/+1.8V LDO regulator for VCORE, integrated POR function
Asynchronous serial UART interface option with full hardware handshaking and modem interface signals
Fully assisted hardware or X-On/X-Off software handshaking
UART interface supports 7/8-bit data, 1/2 stop bits and odd/even/mark/space/no parity
Auto-transmit enable control for RS485 serial applications using TXDEN pin
Operation configuration mode and USB description strings configurable in external EEPROM over USB

Application

Computers & Computer Peripherals
Signal Processing
Sensing & Instrumentation
Industrial
Automation & Process Control

Specifications

Programmabe	Not Verified	Protocol	USB
Function	Bridge, USB to UART,FIFO	Interface	UART, FIFO
Standards	USB 2.0	Voltage - Supply	1.62V ~ 1.98V, 2.97V ~ 3.63V
Current - Supply	24mA	Operating Temperature	-40°C ~ 85°C