This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

FPF2595UCX

Load Switch, Over-Voltage, Over-Current Protection with Adjustable Current-Limit Control, IntelliMAX™ 28 V

Manufacturer:

ON Semiconductor, LLC
Mfr.Part #:

FPF2595UCX
Datasheet:

FPF2595UCX Datasheet (PDF)
Case Outline:

567RA
MSL Temp (°C):

260
Container Type:

REEL
EDA/CAD Models:

Request Free CAD Models for FPF2595UCX

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

FPF2595UCX General Description

The FPF2595 advanced load-management switch targets applications requiring a highly integrated solution. It disconnects loads powered from the DC power rail (<6 V) with stringent off-state current targets and high load capacitances (<100 µF). The FPF2595 consists of a slew-rate controlled low-impedance MOSFET switch (35 mΏ typical) and integrated analog features. The slew-rate controlled turn-on characteristic prevents inrush current and the resulting excessive voltage droop on power rails. FPF2595 has over-voltage protection and over-temperature protection.
The FPF2595 has a True Reverse-Current Blocking (TRCB) function that obstructs unwanted reverse current from V_OUT to V_IN during ON and OFF states. The exceptionally low off-state current drain (<2 µA maximum) facilitates compliance with standby power requirements. The input voltage range operates from 2.5 V to 5.5 V_DC to support a wide range of applications in consumer, optical, medical, storage, portable, and industrial-device power management. Switch control is managed by a logic input (active HIGH) capable of interfacing directly with low-voltage control signal / General-Purpose Input / Output (GPIO) without an external pull-down resistor.
The device is packaged in advanced, fully “green” compliant, 1.3 mm x 1.8 mm, Wafer-Level Chip-Scale Packages (WLCSP).

Key Features

V_IN: 2.5 V~5.5 V
28 V Absolute Ratings at VOUT
Current Capability: 3.9 A
Typ 0.1 A~3.5 A with 10% Accuracy
R_ON: Typ. 35 mΩ & Max. 50 mΩ at 5 V_IN and 1 A I_OUT
Output OVP: Min.=5.6 V, Typ.=5.8 V, Max.=6 V
No Output Discharge During Off State
Open-Drain OCP on FLAGB
Thermal Shutdown
Under-Voltage Lockout (UVLO)
True Reverse-Current Blocking (TRCB)
Logic CMOS IO Meets JESD76 Standard for GPIO Interface and Related Power Supply Requirements
ESD Protected:
Human Body Model: >2 kV
IEC 61000-4-2 Air Discharge: >15 kV
Charged Device Model: >1.0 kV
IEC 61000-4-2 Contact Discharge: >8 kV