This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

FNA51060T3

Power Driver Module IGBT 3 Phase Inverter 600 V 10 A 20-PowerDIP Module (1.220", 31.00mm)

Manufacturer:

ON Semiconductor, LLC
Mfr.Part #:

FNA51060T3
Datasheet:

FNA51060T3 Datasheet (PDF)
Case Outline:

MODER
MSL Temp (°C):

0
Container Type:

TUBE

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

FNA51060T3 General Description

FNA51060T3 is a Motion SPM 55 module providing a fully-featured, high-performance inverter output stage for AC Induction, BLDC, and PMSM motors. These modules integrate optimized gate drive of the built-in IGBTs to minimize EMI and losses, while also providing multiple on-module protection features including under-voltage lockouts, inter-lock function, over-current shutdown, thermal monitoring of drive IC, and fault reporting. The built-in, high-speed HVIC requires only a single supply voltage and translates the incoming logic-level gate inputs to the high-voltage, high-current drive signals required to properly drive the module's robust short-circuit-rated IGBTs. Separate negative IGBT terminals are available for each phase to support the widest variety of control algorithms.

Key Features

UL Certified No. E209204 (UL1557)
600 V - 10 A 3-Phase IGBT Inverter Including ControlIC for Gate Drive and Protections
Low-Loss, Short-Circuit Rated IGBTs
Separate Open-Emitter Pins from Low-Side IGBTs for Three-Phase Current Sensing
Active-HIGH interface, works with 3.3 / 5 V Logic,Schmitt-trigger Input
HVIC for Gate Driving, Under-Voltage and Short-Circuit Current Protection
Fault Output for Under-Voltage and Short-Circuit Current Protection
Inter-Lock Function to Prevent Short-Circuit
Shut-Down Input
HVIC Temperature-Sensing Built-In for Temperature Monitoring
Optimized for 5 kHz Switching Frequency
Isolation Rating: 1500 V_rms / min.