This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

F28388DZWTSR +BOM

C28x Automotive, AEC-Q100, C2000™ C28x Fixed-Point Microcontroller IC 32-Bit Dual-Core 200MHz 1MB (512K x 16) FLASH 337-NFBGA (16x16)

Manufacturer:

Texas Instruments, Inc
Mfr.Part #:

F28388DZWTSR
Datasheet:

F28388DZWTSR Datasheet (PDF)
CPU:

2x C28x, 2x CLA
Frequency (MHz):

200
Flash memory (kByte):

1536
RAM (kByte):

338
EDA/CAD Models:

Request Free CAD Models for F28388DZWTSR

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

F28388DZWTSR General Description

32-bit Microcontrollers - MCU C2000™ 32-bit MCU w/ connectivity manager, 2x C28x+CLA CPU, 1.5-MB flash, FPU64, CLB, ENET, EtherCAT 337-NFBGA -40 to 125

Key Features

Dual-core C28x architecture
- Two TMS320C28x 32-bit CPUs
  - 200 MHz
  - IEEE 754 double-precision (64-bit) Floating-Point Unit (FPU)
  - Trigonometric Math Unit (TMU)
  - CRC engine and instructions (VCRC)
  - Fast Integer Division (FINTDIV)
- 512KB (256KW) of flash on each CPU (ECC-protected)
- 44KB (22KW) of local RAM on each CPU
- 128KB (64KW) of global RAM shared between the two CPUs (parity-protected)
Two Control Law Accelerators (CLAs)
- 200 MHz
- IEEE 754 single-precision floating-point
- Executes code independently of C28x CPU
System peripherals
- Two External Memory Interfaces (EMIFs) with ASRAM and SDRAM support
- Two 6-channel Direct Memory Access (DMA) controllers
- Up to 169 General-Purpose Input/Output (GPIO) pins with input filtering
- Expanded Peripheral Interrupt controller (ePIE)
- Low-power mode (LPM) support
- Dual-zone security for third-party development
- Unique Identification (UID) number
- Embedded Real-time Analysis and Diagnostic (ERAD)
- Background CRC (BGCRC)
Connectivity Manager (CM)
- Arm Cortex-M4 processor
- 125 MHz
- 512KB of flash (ECC-protected)
- 96KB of RAM (ECC-protected or parity-protected)
- Advanced Encryption Standard (AES) accelerator
- Generic CRC (GCRC)
- 32-channel Micro Direct Memory Access (µDMA) controller
- Universal Asynchronous Receiver/Transmitter (CM-UART)
- Inter-integrated Circuit (CM-I2C)
- Synchronous Serial Interface (SSI)
- 10/100 Ethernet 1588 MII/RMII
C28x communications peripherals
- Fast Serial Interface (FSI) with two transmitters and eight receivers
- Four high-speed (up to 50-MHz) SPI ports (pin-bootable)
- Four Serial Communications Interfaces (SCI/UART) (pin-bootable)
- Two I2C interfaces (pin-bootable)
- Power-Management Bus (PMBus) interface
- Two Multichannel Buffered Serial Ports (McBSPs)
CM-C28x shared communications peripherals
- EtherCAT Slave Controller (ESC)
- USB 2.0 (MAC + PHY)
- Two Controller Area Network (CAN) modules (pin-bootable)
- MCAN (CAN FD)
Analog subsystem
- Four Analog-to-Digital Converters (ADCs)
  - 16-bit mode
    - 1.1 MSPS each
    - 12 differential or 24 single-ended inputs
  - 12-bit mode
    - 3.5 MSPS each
    - 24 single-ended inputs
  - Single sample-and-hold (S/H) on each ADC
  - Hardware post-processing of conversions
- Eight windowed comparators with 12-bit Digital-to-Analog Converter (DAC) references
- Three 12-bit buffered DAC outputs
Control peripherals
- 32 Pulse Width Modulator (PWM) channels
  - High resolution on both A and B channels of 8 PWM modules (16 channels)
  - Dead-band support (on both standard and high resolution)
- Seven Enhanced Capture (eCAP) modules
  - High-resolution Capture (HRCAP) available on two of the seven eCAP modules
- Three Enhanced Quadrature Encoder Pulse (eQEP) modules
- Eight Sigma-Delta Filter Module (SDFM) input channels, 2 independent filters per channel
Configurable Logic Block (CLB)
- Augments existing peripheral capability
- Supports position manager solutions
Clock and system control
- Two internal zero-pin 10-MHz oscillators
- On-chip crystal oscillator
- Windowed watchdog timer module
- Missing clock detection circuitry
- Dual-clock Comparator (DCC)
Hardware Built-in Self Test (HWBIST)
1.2-V core, 3.3-V I/O design
Functional Safety-Compliant
- Developed for functional safety applications
- Documentation available to aid ISO 26262 and IEC 61508 system design
- Systematic capability up to ASIL D and SIL 3
- Hardware capability up to ASIL B and SIL 2
Safety-related certification
- ISO 26262 certified up to ASIL B by TÜV SÜD
- IEC 61508 certified up to SIL 2 by TÜV SÜD
Package options:
- Lead-free, green packaging
- 337-ball New Fine Pitch Ball Grid Array (nFBGA) [ZWT suffix]
- 176-pin PowerPAD™ Thermally Enhanced Low-profile Quad Flatpack (HLQFP) [PTP suffix]
Temperature options:
- S: –40°C to 125°C junction
- Q: –40°C to 125°C ambient (AEC Q100 qualification for automotive applications)

Specifications

CPU	2x C28x, 2x CLA	Frequency (MHz)	200
Flash memory (kByte)	1536	RAM (kByte)	338
ADC resolution (Bps)	12, 16	Total processing (MIPS)	925
Features	CAN FD, Configurable logic block, Connectivity manager, EtherCAT, Ethernet, FPU64	UART	4
CAN (#)	3	Sigma-delta filter	8
PWM (Ch)	32	TI functional safety category	Functional Safety-Compliant
Number of ADC channels	12, 16	Direct memory access (Ch)	12
SPI	8	QEP	32
USB	Yes	Operating temperature range (°C)	-40 to 125
Rating	Catalog	Communication interface	CAN, CAN FD, EtherCAT, Ethernet, FSI, I2C, McBSP, PMBUS, SCI, SPI, USB