Payment Method
DS26LS31MJ/883
Quad Transmitter RS-422 16-Pin CDIP Tube
-
Manufacturer:
-
Mfr.Part #:
DS26LS31MJ/883
-
Datasheet:
-
Number of receivers:
0
-
Number of transmitters:
4
-
Duplex:
Half
-
Supply voltage (nom) (V):
5
-
EDA/CAD Models:
Availability: 1000 PCS
Please fill in the short form below and we will provide you the quotation immediately.
DS26LS31MJ/883 General Description
The DS26LS31MQML is a quad differential line driver designed for digital data transmission over balanced lines. The DS26LS31MQML meets all the requirements of EIA Standard RS-422 and Federal Standard 1020. It is designed to provide unipolar differential drive to twisted-pair or parallel-wire transmission lines.
The circuit provides an enable and disable function common to all four drivers. The DS26LS31MQML features TRI-STATE outputs and logically ANDed complementary outputs. The inputs are all LS compatible and are all one unit load.
The DS26LS31 features a power up/down protection circuit which keeps the output in a high impedance state (TRI-STATE) during power up or down preventing erroneous glitches on the transmission lines.
Key Features
- Operation from Single 5V Supply
- Outputs Won't Load Line When VCC = 0V
- Four Line Drivers in One Package for Maximum Package Density
- Output Short-Circuit Protection
- Complementary Outputs
- Meets the Requirements of EIA Standard RS-422
- Pin Compatible with AM26LS31
- Glitch Free Power Up/Down
All trademarks are the property of their respective owners.
Specifications
Number of receivers | 0 | Number of transmitters | 4 |
Duplex | Half | Supply voltage (nom) (V) | 5 |
Signaling rate (max) (MBits) | 10 | Fault protection (V) | -0.5 to 7 |
Common-mode range (V) | -7 to 7 | Number of nodes | 32 |
Isolated | No | Supply current (max) (µA) | 60000 |
Rating | Military | Operating temperature range (°C) | -55 to 125 |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
DS26LS31MJ/883 Datasheet PDF
DS26LS31MJ/883 PDF Preview
Availability: 1000 PCS
+BOMQty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for DS26LS31MJ/883, guaranteed quotes back within 12hr.
Top Sellers
-
SN65HVD230DR
TI
1000+ $0.403
-
SN75176BP
Texas Instruments
1000+ $0.309
-
PCF8574AN
TI
8-bit 2.5- to 5.5-V I2C/SMBus I/O expander with interrupt
-
MAX232N
Texas Instruments
Dual Transmitter/Receiver RS-232 16-Pin PDIP Tube
-
TCA6424RGJR
Texas Instruments, Inc
24-bit translating 1.65- to 5.5-V I2C/SMBus I/O expander with interrupt, reset & config registers
The goods are received in safety, corresponds to the description. Seller recommend, thank you.