This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

DS10CP154ATSQ/NOPB

1.5-Gbps 4x4 LVDS crosspoint switch

Manufacturer:

Texas Instruments, Inc
Mfr.Part #:

DS10CP154ATSQ/NOPB
Datasheet:

DS10CP154ATSQ/NOPB Datasheet (PDF)
Function:

Crosspoint
Protocols:

CML, LVDS, LVPECL
Number of transmitters:

4
Number of receivers:

4
EDA/CAD Models:

Request Free CAD Models for DS10CP154ATSQ/NOPB

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

DS10CP154ATSQ/NOPB General Description

The DS10CP154A is a 1.5 Gbps 4x4 LVDS crosspoint switch optimized for high-speed signal routing and switching over FR-4 printed circuit board backplanes and balanced cables. Fully differential signal paths ensure exceptional signal integrity and noise immunity. The non-blocking architecture allows connections of any input to any output or outputs. The switch configuration can be accomplished via external pins or the System Management Bus (SMBus) interface. In addition, the SMBus circuitry enables the loss of signal (LOS) monitors that can inform a system of the presence of an open inputs condition (e.g. disconnected cable).

Wide input common mode range allows the switch to accept signals with LVDS, CML and LVPECL levels; the output levels are LVDS. A very small package footprint requires a minimal space on the board while the flow-through pinout allows easy board layout. Each differential input and output is internally terminated with a 100Ω resistor to lower return losses, reduce component count and further minimize board space.

Texas Instruments, IncMicrosoft.AspNetCore.Mvc.Localization.LocalizedHtmlString

Key Features

DC - 1.5 Gbps Low Jitter, Low Skew, Low Power Operation
Pin and SMBus Configurable, Fully Differential, Non-Blocking Architecture
Wide Input Common Mode Range Enables DC Coupled Interface to CML or LVPECL Drivers
LOS Circuitry Detects Open Inputs Fault Condition
On-chip 100 Ω Input and Output Termination Minimizes Insertion and Return Losses, Reduces Component Count and Minimizes Board Space
8 kV ESD on LVDS I/O Pins Protects Adjoining Components
Small 6 mm x 6 mm WQFN-40 Space Saving Package

All trademarks are the property of their respective owners.

Specifications

Function	Crosspoint	Protocols	CML, LVDS, LVPECL
Number of transmitters	4	Number of receivers	4
Supply voltage (V)	3.3	Signaling rate (MBits)	1500
Input signal	CML, LVDS, LVPECL	Output signal	LVDS
Rating	Catalog	Operating temperature range (°C)	-40 to 85
feature-type		feature-logic-function
feature-logic-family		feature-array-configuration	4x4
feature-number-of-arrays	1	feature-maximum-data-rate-mbps	1.5
feature-number-of-elements-per-chip		feature-configuration
feature-number-of-outputs-per-chip		feature-number-of-inputs-per-chip
feature-polarity		feature-packaging	Tape and Reel
feature-rad-hard		feature-pin-count	40
feature-cecc-qualified	No	feature-esd-protection	Yes
feature-escc-qualified		feature-military	No
feature-aec-qualified	No	feature-aec-qualified-number
feature-eccn-code	EAR99	feature-svhc	Yes
feature-svhc-exceeds-threshold	No