This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

DRV8841PWPR

45-V, 2.5-A bipolar stepper or dual H-bridge motor driver IC with current regulation and PWM control

Manufacturer:

TI
Mfr.Part #:

DRV8841PWPR
Datasheet:

DRV8841PWPR Datasheet (PDF)
Number of full bridges:

2
Vs (min) (V):

8.2
Vs ABS (max) (V):

47
Full-scale current (A):

2.5
EDA/CAD Models:

Request Free CAD Models for DRV8841PWPR

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

DRV8841PWPR General Description

The DRV8841 provides an integrated dual H-bridge motor driver solution for printers, scanners, and other automated equipment applications. The device can be used to drive one or two brushed DC motors, a bipolar stepper motor, or other loads. A simple PWM interface allows easy interfacing to controller circuits.

The output driver block consists of N-channel power MOSFETs configured as H-bridges. The DRV8841 an supply up to 2.5-A peak or 1.75-A RMS output current (with proper heat sinking at 24 V and T_A = 25°C) per H-bridge.

A low-power sleep mode is provided which shuts down internal circuitry to achieve very low quiescent current draw. This sleep mode can be set using a dedicated nSLEEP pin. Internal protection features are provided for overtemperature, overcurrent, and undervoltage. Fault conditions are indicated by a nFAULT pin.

Key Features

Dual H-Bridge DC Motor Driver
- Single and Dual Brushed DC
- Stepper
PWM Control Interface
Optional Fixed Frequency Current Regulation
- Two Bit Current Control Allows Up to Four
  Current Levels
Low MOSFET On-Resistance
- 2.5-A Maximum Drive Current at 24 V and
  T_A = 25°C
- Combined 400 mΩ R_DS(ON) of High-Side
  and Low-Side at 24 V and T_A = 25°C
8.2-V to 45-V Operating Supply Voltage Range
Low Current Sleep Mode
Built-In 3.3-V Reference Output
Thermally Enhanced Surface Mount Package
Protection Features
- Overcurrent Protection (OCP)
- Thermal Shutdown (TSD)
- Undervoltage Lockout (UVLO)
- Fault Condition Indication Pin (nFAULT)

Specifications

Number of full bridges	2	Vs (min) (V)	8.2
Vs ABS (max) (V)	47	Full-scale current (A)	2.5
Peak output current (A)	3	RDS(ON) (HS + LS) (mΩ)	400
Sleep current (µA)	10	Control mode	PWM
Control interface	Hardware (GPIO)	Microstepping levels	4
Features	Current Regulation	Rating	Catalog
Operating temperature range (°C)	-40 to 85