This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

CYPM1322-97BZXI

ARM® Cortex®-M0+ EZ-PD™ PMG1 Microcontroller IC 32-Bit 48MHz 256KB (256K x 8) FLASH 97-BGA (6x6)

Manufacturer:

Infineon
Mfr.Part #:

CYPM1322-97BZXI
Datasheet:

CYPM1322-97BZXI Datasheet (PDF)
Series:

EZ-PD PMG1-S3
Mounting Style:

SMD/SMT
Core:

ARM Cortex M0+
Program Memory Size:

256 kB
EDA/CAD Models:

Request Free CAD Models for CYPM1322-97BZXI

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

CYPM1322-97BZXI General Description

Infineon’s EZ-PD™ PMG1-S3 CYPM1322-97BZXI is the dual port, tray packing type product of the PMG1-S3 family of high-voltage microcontrollers. It is targeted to devices, docks, and accessory applications.Its Cortex®-M0+ is a 32-bit MCU that is optimized for low-power operation with extensive clock gating. The CPU sub-system also includes a 16-channel DMA/Datawire block and a serial wire debug (SWD) interface, which is a two-wire form of JTAG. The debug configuration used for PMG1-S3 has four break-point (address) comparators and two watchpoint (data) comparators.EZ-PD™ PMG1-S3 includes an integrated load switch controller with the following functions: overvoltage and undervoltage protection on VBUS, over current, short-circuit current and reverse current fault detection comparators for VBUS, VBUS discharge, and flexible gate drivers for VBUS NFETs. It comes with up to eight TCPWMs that can be used as internal timers by firmware or for providing PWM-based functions on the GPIOs. It also comes with eight SCB blocks that can be configured for I2C, SPI, or UART. These blocks implement full multi-master and slave I2C interfaces capable of multi-master arbitration. I2C is compatible with the standard Philips I2C specification V3.0.The EZ-PD™ PMG1-S3 CYPM1322 has 50 GPIOs including the SCB and SWD pins which can also be used as GPIOs. All the GPIOs reside in a separate I/O power domain called VDDIO (with exception of SBU GPIO). The separate I/O power domain provides flexible system-level interfacing. GPIOs connected to SBU (connector side) are on the VDDD domain and not on the VDDIO domain.CAPSENSE™ is supported on 16 pins via a CAPSENSE™ sigma-delta (CSD) block, which can be connected to any pin via the analog mux buses that any GPIO pin can be connected to. Its function can thus be provided on any pin or group of pins in a system under software control.The EZ-PD™ PMG1 family has a rich set of documentation, development tools, and online resources to assist system designers during their development process. ModusToolbox™ with PMG1 SDK, along with the CY7113 kit and its quick start guide, make firmware development and testing simple and easy, sharply reducing development time and time to market.

Specifications

Product Category	ARM Microcontrollers - MCU	Series	EZ-PD PMG1-S3
Mounting Style	SMD/SMT	Core	ARM Cortex M0+
Program Memory Size	256 kB	Data Bus Width	32 bit
ADC Resolution	12 bit	Maximum Clock Frequency	48 MHz
Number of I/Os	50 I/O	Data RAM Size	32 kB
Supply Voltage - Min	2.8 V	Supply Voltage - Max	5.5 V
Minimum Operating Temperature	- 40 C	Maximum Operating Temperature	+ 85 C
Data RAM Type	SRAM	Interface Type	I2C, SPI, UART, USB
Moisture Sensitive	Yes	Number of ADC Channels	8 Channel
Product	MCUs	Product Type	ARM Microcontrollers - MCU
Program Memory Type	Flash	Factory Pack Quantity	2450
Subcategory	Microcontrollers - MCU	Tradename	EZ-PD
Watchdog Timers	Watchdog Timer	Part # Aliases	SP005674123