This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

CC2640F128RSMT +BOM

SimpleLink™ 32-bit Arm Cortex-M3 Bluetooth® Low Energy wireless MCU with 128kB Flash

Manufacturer:

Texas Instruments, Inc
Mfr.Part #:

CC2640F128RSMT
Datasheet:

CC2640F128RSMT Datasheet (PDF)
Series:

SimpleLink™
Programmable:

Not Verified
Type:

TxRx + MCU
RF Family/Standard:

Bluetooth
EDA/CAD Models:

Request Free CAD Models for CC2640F128RSMT

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

CC2640F128RSMT General Description

The CC2640 device is a wireless MCU targeting Bluetooth applications.

The device is a member of the CC26xx family of cost-effective, ultralow power, 2.4-GHz RF devices. Very low active RF and MCU current and low-power mode current consumption provide excellent battery lifetime and allow for operation on small coin cell batteries and in energy-harvesting applications.

The CC2640 device contains a 32-bit ARM Cortex-M3 processor that runs at 48 MHz as the main processor and a rich peripheral feature set that includes a unique ultralow power sensor controller. This sensor controller is ideal for interfacing external sensors and for collecting analog and digital data autonomously while the rest of the system is in sleep mode. Thus, the CC2640 device is ideal for a wide range of applications where long battery lifetime, small form factor, and ease of use is important.

The Bluetooth Low Energy controller is embedded into ROM and runs partly on an ARM Cortex-M0 processor. This architecture improves overall system performance and power consumption and frees up flash memory for the application.

The Bluetooth stack is available free of charge from www.ti.com.

Key Features

Microcontroller
- Powerful ARM^® Cortex^®-M3
- EEMBC CoreMark^® Score: 142
- Up to 48-MHz Clock Speed
- 128KB of In-System Programmable Flash
- 8KB of SRAM for Cache
- 20KB of Ultralow-Leakage SRAM
- 2-Pin cJTAG and JTAG Debugging
- Supports Over-The-Air Upgrade (OTA)
Ultralow-Power Sensor Controller
- Can Run Autonomous From the Rest of the System
- 16-Bit Architecture
- 2KB of Ultralow-Leakage SRAM for Code and Data
Efficient Code Size Architecture, Placing Drivers, Bluetooth^® Low Energy Controller, and Bootloader in ROM
RoHS-Compliant Packages
- 4-mm × 4-mm RSM VQFN32 (10 GPIOs)
- 5-mm × 5-mm RHB VQFN32 (15 GPIOs)
- 7-mm × 7-mm RGZ VQFN48 (31 GPIOs)
Peripherals
- All Digital Peripheral Pins Can Be Routed to Any GPIO
- Four General-Purpose Timer Modules
  (Eight 16-Bit or Four 32-Bit Timers, PWM Each)
- 12-Bit ADC, 200-ksamples/s, 8-Channel Analog MUX
- Continuous Time Comparator
- Ultralow-Power Analog Comparator
- Programmable Current Source
- UART
- 2× SSI (SPI, MICROWIRE, TI)
- I2C
- I2S
- Real-Time Clock (RTC)
- AES-128 Security Module
- True Random Number Generator (TRNG)
- 10, 15, or 31 GPIOs, Depending on Package Option
- Support for Eight Capacitive-Sensing Buttons
- Integrated Temperature Sensor
External System
- On-Chip internal DC-DC Converter
- Very Few External Components
- Seamless Integration With the SimpleLink™ CC2590 and CC2592 Range Extenders
- Pin Compatible With the SimpleLink CC13xx in 4-mm × 4-mm and 5-mm × 5-mm VQFN Packages
Low Power
- Wide Supply Voltage Range
  - Normal Operation: 1.8 to 3.8 V
  - External Regulator Mode: 1.7 to 1.95 V
- Active-Mode RX: 5.9 mA
- Active-Mode TX at 0 dBm: 6.1 mA
- Active-Mode TX at +5 dBm: 9.1 mA
- Active-Mode MCU: 61 µA/MHz
- Active-Mode MCU: 48.5 CoreMark/mA
- Active-Mode Sensor Controller: 8.2 µA/MHz
- Standby: 1 µA (RTC Running and RAM/CPU Retention)
- Shutdown: 100 nA (Wake Up on External Events)
RF Section
- 2.4-GHz RF Transceiver Compatible With Bluetooth Low Energy (BLE) 4.2 Specification
- Excellent Receiver Sensitivity (–97 dBm for BLE), Selectivity, and Blocking Performance
- Link budget of 102 dB for BLE
- Programmable Output Power up to +5 dBm
- Single-Ended or Differential RF Interface
- Suitable for Systems Targeting Compliance With Worldwide Radio Frequency Regulations
  - ETSI EN 300 328 (Europe)
  - EN 300 440 Class 2 (Europe)
  - FCC CFR47 Part 15 (US)
  - ARIB STD-T66 (Japan)
Tools and Development Environment
- Full-Feature and Low-Cost Development Kits
- Multiple Reference Designs for Different RF Configurations
- Packet Sniffer PC Software
- Sensor Controller Studio
- SmartRF™ Studio
- SmartRF Flash Programmer 2
- IAR Embedded Workbench^® for ARM
- Code Composer Studio™

All trademarks are the property of their respective owners.

Specifications

Category	RF and WirelessRF Transceiver ICs	Series	SimpleLink™
Programmable	Not Verified	Type	TxRx + MCU
RF Family/Standard	Bluetooth	Protocol	Bluetooth v5.1
Modulation	DSSS, O-QPSK, GFSK	Frequency	2.4GHz
Data Rate (Max)	1Mbps	Power - Output	5dBm
Sensitivity	-97dBm	Memory Size	128kB Flash, 28kB SRAM
Serial Interfaces	I²C, I²S, JTAG, SPI, UART	GPIO	10
Voltage - Supply	1.8V ~ 3.8V	Current - Receiving	5.9mA ~ 6.1mA
Current - Transmitting	6.1mA ~ 9.1mA	Operating Temperature	-40°C ~ 85°C
Mounting Type	Surface Mount	Base Product Number	CC2640
Protocols	Bluetooth low energy 5.1	Features	LE 1M PHY
Peripherals	1 UART, 12-bit ADC 8-channel, 2 SPI, 2 comparators, 4 timers, 8-bit DAC, I2C, I2S, Sensor controller	Rating	Catalog
Flash memory (kByte)	128	RAM (kByte)	20
Number of GPIOs	10, 15, 31	Security	Cryptographic acceleration, Debug security, Device identity, Software IP protection
Sensitivity (best) (dBm)	-97	Operating temperature range (°C)	-40 to 85
feature-packaging	Tape and Reel	feature-pin-count	32
feature-cecc-qualified	No	feature-esd-protection	Yes
feature-military	No	feature-aec-qualified	No
feature-aec-qualified-number		feature-auto-motive	No
feature-p-pap	No	feature-eccn-code	5A992C
feature-svhc	No	feature-svhc-exceeds-threshold	No

Service Policies and Others

After-Sales & Settlement Related

Payment

Payment Method

TT/Wire Transfer

Paypal

Western Union

Money Gram

For alternative payment channels, please reach out to us at:

[email protected]

Shipping & Packing

Shipping Method

Fedex

UPS

DHL

NTN

Packing

AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.

Warranty

365-Day Product

Quality Guarantee

We promise to provide 365 days quality assurance service for all our products.

Ratings and Reviews

E**y 10/01/2022

Shipping 45 days. Took for shurik. I hope everything will be fine.

C**b 11/05/2021

I order not for the first time. Everything is very good! Thank you!

N**s 09/08/2020

The seller is very concerned. Thank you.

M**a 08/29/2020

Everything went well. The number and denominations correspond to the description. Selectively checked several denominations. Mainly values in the minus, in 10% tolerance.I believe that the seller has fulfilled its obligations.