Payment Method
BQ2004HSNTR
NiCd/NiMH buck charger w/negative dV, PVD, dT/dt termination and timing setup3
-
Manufacturer:
-
Mfr.Part #:
BQ2004HSNTR
-
Datasheet:
-
Battery Chemistry:
Multi-Chemistry
-
Current - Charging:
Constant, Pulsed
-
Programmable Features:
Voltage
-
Voltage - Supply (Max):
5.5V
-
EDA/CAD Models:
Availability: 5347 PCS
Please fill in the short form below and we will provide you the quotation immediately.
BQ2004HSNTR General Description
The bq2004E and bq2004H Fast Charge ICs provide comprehensive fast charge control functions together with high-speed switching power control circuitry on a monolithic CMOS device.
Integration of closed-loop current control circuitry allows the bq2004 to be the basis of a cost-effective solution for stand-alone and system-integrated chargers for batteries of one or more cells.
Switch-activated discharge-before-charge allows bq2004E/H-based chargers to support battery conditioning and capacity determination.
High-efficiency power conversion is accomplished using the bq2004E/H as a hysteretic PWM controller for switch-mode regulation of the charging current. The bq2004E/H may alternatively be used to gate an externally regulated charging current.
Fast charge may begin on application of the charging supply, replacement of the battery, or switch depression. For safety, fast charge is inhibited unless/until the battery temperature and voltage are within configured limits.
Temperature, voltage, and time are monitored throughout fast charge. Fast charge is terminated by any of the following:
- Rate of temperature rise (t)
- Peak voltage detection (PVD)
- Negative delta voltage (-V)
- Maximum voltage
- Maximum temperature
- Maximum time
After fast charge, optional top-off and pulsed current maintenance phases with appropriate display mode selections are available.
The bq2004H differs from the bq2004E only in that fast charge, hold-off, and top-off time units have been scaled up by a factor of two, and the bq2004H provides different display selections.
Key Features
- Fast charge and conditioning of nickel cadmium or nickel-metal hydride batteries
- Hysteretic PWM switch-mode current regulation or gated control of an external regulator
- Easily integrated into systems or used as a stand-alone charger
- Pre-charge qualification of temperature and voltage
- Configurable, direct LED outputs display battery and charge status
- Fast-charge termination by V, maximum voltage, maximum temperature, and maximum time
- Optional top-off charge and pulsed current maintenance charging
- Logic-level controlled low-power mode (< 5uA standby current)
Specifications
Category | Integrated Circuits (ICs)Power Management (PMIC)Battery Chargers | Series | - |
Battery Chemistry | Multi-Chemistry | Number of Cells | - |
Current - Charging | Constant, Pulsed | Programmable Features | Voltage |
Fault Protection | - | Charge Current - Max | - |
Battery Pack Voltage | - | Voltage - Supply (Max) | 5.5V |
Interface | - | Operating Temperature | -20°C ~ 70°C (TA) |
Mounting Type | Surface Mount | Base Product Number | BQ2004 |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Availability: 5347 PCS
+BOMQty. | Unit Price | Ext. Price |
---|---|---|
1+ | $4.250 | $4.25 |
200+ | $1.645 | $329.00 |
500+ | $1.588 | $794.00 |
1000+ | $1.559 | $1,559.00 |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for BQ2004HSNTR, guaranteed quotes back within 12hr.
Perfect.Congratulations.