This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

BLUENRG-132

Programmable Bluetooth® LE 5.2 Wireless SoC

Manufacturer:

STMicroelectronics, Inc
Mfr.Part #:

BLUENRG-132
Datasheet:

BLUENRG-132 Datasheet (PDF)
Series:

BlueNRG
Programmable:

Not Verified
Type:

TxRx + MCU
RF Family/Standard:

Bluetooth
EDA/CAD Models:

Request Free CAD Models for BLUENRG-132

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

BLUENRG-132 General Description

The BlueNRG-1 is a very low power Bluetooth low energy (BLE) single-mode system-on-chip, compliant with Bluetooth specifications.The BlueNRG-1 extends the features of award-winning BlueNRG network processor, enabling the usage of the embedded Cortex M0 to run the user application code.The BlueNRG-1 includes 160 kB of programming Flash memory, 24 kB of static RAM memory with retention (two 12 kB banks) and SPI, UART, I²C standard communication interface peripherals. It also features multifunction timers, watchdog, RTC and DMA controller.An ADC is available to interface with analog sensors, and to read the measurement of the integrated battery voltage sensor. A digital filter is available to process a PDM stream.The BlueNRG-1 offers the same excellent RF performance of the BlueNRG radio, and the integrated high efficiency DC-DC converter keeps the same ultra-low power characteristics, but the BlueNRG-1 improves the BlueNRG sleep mode current consumption allowing a further increase in the battery lifetime of the applications.Dual radio BLE and Sub-1GHz development kit for .Bluetooth communication board based on BlueNRG-1.STEVAL-IDB007V2 evaluation platform based on the.

STMicroelectronics, IncMicrosoft.AspNetCore.Mvc.Localization.LocalizedHtmlString

Key Features

Bluetooth Low Energy system-on-chip Bluetooth v5.2 certified, supporting:
- Master, slave and multiple simultaneous roles
- LE Privacy 1.2 and LE Secure Connection
Operating supply voltage: from 1.7 to 3.6 V
Integrated linear regulator and DC-DC step-down converter
Operating temperature range: -40 °C to 105 °C
High performance, ultra-low power Cortex-M0 32-bit based architecture core
Programmable 160 kB Flash
24 kB RAM with retention (two 12 kB banks)
1 x UART interface
1 x SPI interface
2 x I²C interface
14 or 15 GPIOs
2 x multifunction timer
10-bit ADC
Watchdog and RTC
DMA controller
PDM stream processor
16 or 32 MHz crystal oscillator
32 kHz crystal oscillator
32 kHz ring oscillator
Battery voltage and temperature sensors
Up to +8 dBm available output power (at antenna connector)
Excellent RF link budget (up to 96 dB)
Accurate RSSI to allow power control
8.3 mA TX current (@ -2 dBm, 3.0 V)
Down to 1 µA current consumption with active BLE stack (sleep mode)
ST companion integrated balun/filter chips are available
Average advertisement current consumption 15.34 µA (advertisement interval 1000 ms) – 1 year, 8 months, 19 days with 230 mAh battery (CR2032)
Average connection current consumption 7.059 µA (connection interval 1000 ms) – 3 years, 10 months, 12 days with 230 mAh battery (CR2032)
Suitable for building applications compliant with the following radio frequency regulations: ETSI EN 300 328, EN 300 440, FCC CFR47 part 15, ARIB STD-T66
Pre-programmed bootloader via UART
QFN32 and WCSP34 package options

Specifications

Category	RF and WirelessRF Transceiver ICs	Series	BlueNRG
Programmable	Not Verified	Type	TxRx + MCU
RF Family/Standard	Bluetooth	Protocol	Bluetooth v5.2
Modulation	-	Frequency	2.4GHz
Data Rate (Max)	1Mbps	Power - Output	8dBm
Sensitivity	-88dBm	Memory Size	160kB Flash, 24kB RAM
Serial Interfaces	ADC, GPIO, I²C, SPI, UART	GPIO	15
Voltage - Supply	1.7V ~ 3.6V	Current - Receiving	7.7mA
Current - Transmitting	15.1mA	Operating Temperature	-40°C ~ 105°C
Mounting Type	Surface Mount	Base Product Number	BLUENRG