Payment Method
BGS13S2N9E6327XTSA1
RF Switch SP3T 100MHz to 3GHz 18dB 9-Pin TSNP T/R
-
Manufacturer:
-
Mfr.Part #:
BGS13S2N9E6327XTSA1
-
Datasheet:
-
Circuit:
SP3T
-
Frequency Range:
100MHz ~ 3GHz
-
Isolation:
23dB
-
Insertion Loss:
0.55dB
Availability: 3864 PCS
Please fill in the short form below and we will provide you the quotation immediately.
BGS13S2N9E6327XTSA1 General Description
The BGS13S2N9 RF CMOS switch is specifically designed for cell phone and mobile applications. Any of the 3 ports can be used as termination of the diversity antenna handling up to 30 dBm.
This SP3T offers low insertion loss and high robustness against interferer signals at the antenna port and low harmonic generation in termination mode. The on-chip controller integrates CMOS logic and level shifters, driven by control inputs from 1.35 V to VDD . The BGS13S2N9 RF Switch is manufactured in Infineon’s patented MOS technology, offering the performance of GaAs with the economy and integration of conventional CMOS including the inherent higher ESD robustness. The device has a very small size of only 1.1 x 1.1 mm2 and a maximum height of 0.375 mm.
Key Features
- 3 high-linearity TRx paths with power handling capability of up to 30 dBm
- Low insertion loss
- Low harmonic generation
- High port-to-port-isolation
- Suitable for Edge / CDMA2000 / LTE / WCDMA applications
- 0.1 to 3.0 GHz coverage
- No decoupling capacitors required if no DC applied on RF lines
- On-chip control logic including ESD protection
- General Purpose Input-Output (GPIO) Interface
- Small form factor 1.1mm x 1.1mm x 0.375mm
- No power supply blocking required
- High EMI robustness
- RoHS and WEEE compliant package
Specifications
Category | RF and WirelessRF Switches | Series | - |
RF Type | - | Topology | - |
Circuit | SP3T | Frequency Range | 100MHz ~ 3GHz |
Isolation | 23dB | Insertion Loss | 0.55dB |
Test Frequency | 3GHz | P1dB | - |
IIP3 | - | Features | - |
Impedance | 50Ohm | Voltage - Supply | 1.8V ~ 3.3V |
Operating Temperature | -40°C ~ 85°C | Mounting Type | Surface Mount |
Base Product Number | BGS13 |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Availability: 3864 PCS
+BOMQty. | Unit Price | Ext. Price |
---|---|---|
1+ | $0.421 | $0.42 |
10+ | $0.340 | $3.40 |
30+ | $0.304 | $9.12 |
100+ | $0.260 | $26.00 |
500+ | $0.241 | $120.50 |
1000+ | $0.230 | $230.00 |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for BGS13S2N9E6327XTSA1, guaranteed quotes back within 12hr.
Top Sellers
-
BGS12SN6E6327XTSA1
Infineon
5000+ $0.183
-
BGS12WN6E6327XTSA1
Infineon
RF Switch IC WLAN SPDT 50Ohm PG-TSNP-6-10
-
BGS12P2L6E6327XTSA1
Infineon Technologies Corporation
RF Switch ICs CMOS SWITCH
-
BGA524N6E6327XTSA1
Infineon Technologies Corporation
RF Amplifier IC GPS/GNSS 1.55GHz ~ 1.615GHz TSNP-6-2
-
BGA725L6E6327FTSA1
Infineon
BGA725L6E6327FTSA1 is a high-performance RF power amplifier chip for wireless communication applications.