This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

BCM5221A4KPTG

Ethernet TXRX Single Chip 1-Port 2.5V/3.3V 10Mbps/100Mbps 64-Pin TQFP

Manufacturer:

Broadcom Limited
Mfr.Part #:

BCM5221A4KPTG
Datasheet:

BCM5221A4KPTG Datasheet (PDF)
Type:

Transceiver
Protocol:

Ethernet
Number of Drivers/Receivers:

1/1
Voltage - Supply:

2.5V ~ 3.3V

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

BCM5221A4KPTG General Description

FAST ETHERNET PHY, TQFP-64; Device Type:Fast Ethernet Transceiver; Supported Standards:IEEE 802.3u; Supply Voltage Min:-; Supply Voltage Max:3.3V; IC Case / Package:TQFP; No. of Pins:64Pins; IC Mounting:Surface Mount; Qualification:-RoHS Compliant: Yes

Key Features

Power Supply: 2.5V or 3.3V Integrated voltage regulator to allow operation from a single supply source Power Consumption: <175 mW Unique energy detection circuit to enable intelligent power management HP Auto-MDIX Cable length indication Cable noise level indication Robust CESD tolerance Cable length greater than 145 meters Well under 10 PPM defect ratio quality 10% voltage tolerance Industrial temperature range (40 to 85C) package options available. MII and RMII configurable IEEE 1149.1 (JTAG) scan chain support MII Management via serial port Layout compatible with BCM5201 10BASE-T/100BASE-TX/FX IEEE 802.3u Fast Ethernet transceiver Glueless TX-to-FX media conversion 64-pin TQFP with 64-pin BGA package, 48-pin KML package; RoHS 5/6 and 6/6 package options available

Application

Servers - Network Controller - Sideband Interface (NC-SI) using RMII interface |Digital TV, PCMCIA/CardBus cards, LAN on motherboard (LOM), IP phones, cable modems, set-top boxes and print servers, wireless access points, and embedded telecom

Specifications

Type	Transceiver	Protocol	Ethernet
Number of Drivers/Receivers	1/1	Duplex	-
Receiver Hysteresis	-	Data Rate	-
Voltage - Supply	2.5V ~ 3.3V	Operating Temperature	-40°C ~ 85°C
Mounting Type	-	Product Category	Ethernet ICs
Mounting Style	SMD/SMT	Product	Ethernet Transceivers
Standard	10BASE-TX/FX, 100BASE-TX/FX	Number of Transceivers	1 Transceiver
Interface Type	MII, RMII	Supply Voltage - Min	2.5 V/3.3 V
Supply Voltage - Max	2.5 V/3.3 V	Minimum Operating Temperature	- 40 C
Maximum Operating Temperature	+ 85 C	Moisture Sensitive	Yes
Product Type	Ethernet ICs	Factory Pack Quantity	1120
Subcategory	Communication & Networking ICs	Unit Weight	0.012720 oz