This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

AT25F4096

NOR Flash

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

Serial Peripheral Interface (SPI) Compatible
Supports SPI Modes 0 (0,0) and 3 (1,1)
20 MHz Clock Rate
Byte Mode and 256-byte Page Mode for Program Operations
Sector Architecture:
– Two Sectors with 32K Bytes Each (512K)
– Four Sectors with 32K Bytes Each (1M)
– 128 Pages per Sector
Product Identification Mode
Low-voltage Operation
– 2.7 (VCC= 2.7V to 3.6V)
Sector Write Protection
Write Protect (WP) Pin and Write Disable Instructions for both Hardware and Software Data Protection
Self-timed Program Cycle (60 µs/Byte Typical)
Self-timed Sector Erase Cycle (1 second/Sector Typical)
Single Cycle Reprogramming (Erase and Program) for Status Register
High Reliability
– Endurance: 10,000 Write Cycles Typical
Lead-free Devices Available
8-lead JEDEC SOIC and 8-lead SAP Packages

Product Category	NOR Flash	Mounting Style	SMD/SMT
Series	AT25F	Memory Size	4 Mbit
Supply Voltage - Min	2.7 V	Supply Voltage - Max	3.6 V
Active Read Current - Max	17 mA	Interface Type	SPI
Maximum Clock Frequency	33 MHz	Organization	512 k x 8
Data Bus Width	8 bit	Timing Type	Synchronous
Minimum Operating Temperature	- 40 C	Maximum Operating Temperature	+ 85 C
Architecture	Sector	Memory Type	NOR
Product Type	NOR Flash	Speed	33 MHz
Subcategory	Memory & Data Storage	Unit Weight	0.019048 oz