This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

ADRF5730BCCZN +BOM

The ADRF5730 is a silicon, 6-bit digital attenuator with 31.5 dB attenuation control range in 0.5 dB steps.

Manufacturer:

Analog Devices, Inc
Mfr.Part #:

ADRF5730BCCZN
Datasheet:

ADRF5730BCCZN Datasheet (PDF)
feature-maximum-attenuation-db:

31.5(Typ)
feature-packaging:

Cut Tape
feature-pin-count:

24
feature-esd-protection:

Yes
EDA/CAD Models:

Request Free CAD Models for ADRF5730BCCZN

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

ADRF5730BCCZN General Description

The ADRF5730BCCZN is a dual-channel RF mixer, which means it has two independent mixing channels in a single package. Mixers are essential components in RF and microwave systems used for frequency translation, modulation, demodulation, and signal processing.

Key Features

Ultrawideband frequency range: 100 MHz to 40 GHz
Attenuation range: 0.5 dB steps to 31.5 dB
Low insertion loss with impedance match
2.1 dB up to 18 GHz
2.9 dB up to 26 GHz
4.8 dB up to 40 GHz
Attenuation accuracy with impedance match
Typical step error with impedance match
High input linearity
P0.1dB insertion loss state: 30 dBm
P0.1dB other attenuation states: 27 dBm
IP3: 50 dBm typical
High RF input power handling: 27 dBm average, 30 dBm peak
Tight distribution in relative phase
No low frequency spurious signals
SPI and parallel mode control, CMOS/LVTTL compatible
RF settling time (0.1 dB of final RF output): 250 ns
24-terminal, 4 mm × 4 mm LGA package
Pin compatible with ADRF5720, low frequency cutoff version

Application

Frequency Conversion
Modulation and Demodulation
Signal Processing
Test and Measurement
Communication Systems
Radar Systems

Specifications

feature-type		feature-attenuation-tolerance-db
feature-maximum-attenuation-db	31.5(Typ)	feature-maximum-insertion-loss-db
feature-impedance-ohm		feature-packaging	Cut Tape
feature-rad-hard		feature-pin-count	24
feature-cecc-qualified		feature-esd-protection	Yes
feature-escc-qualified		feature-military	No
feature-aec-qualified	No	feature-auto-motive	No
feature-p-pap	No	feature-eccn-code	EAR99
feature-svhc	No	feature-svhc-exceeds-threshold	No

Service Policies and Others

After-Sales & Settlement Related

Payment

Payment Method

TT/Wire Transfer

Paypal

Western Union

Money Gram

For alternative payment channels, please reach out to us at:

[email protected]

Shipping & Packing

Shipping Method

Fedex

UPS

DHL

NTN

Packing

AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.

Warranty

365-Day Product

Quality Guarantee

We promise to provide 365 days quality assurance service for all our products.

Ratings and Reviews

J**n 02/21/2024

My product had solder joins that overlapped and didn't work initially. After doing much internet research I found others complaining of the same issue. After doing some multimeter continuity tests I found the tiny overlapping solder joints and using a small blade, managed to split them. It then worked.

M**n 01/22/2022

It took a short time, but it came!Remake shurika until it turns out, there is no time...So i can not say anything about work.

C**n 01/20/2022

Hallo!I would like to ask you the name of the transistor in this set.Thank you.Regards.