Payment Method
ADF7021-NBCPZ
48-Pin LFCSP EP Tray
-
Manufacturer:
-
Mfr.Part #:
ADF7021-NBCPZ
-
Datasheet:
-
Programmable:
Not Verified
-
Type:
TxRx Only
-
RF Family/Standard:
General ISM < 1GHz
-
Modulation:
2FSK, 2GFSK, 3FSK, 4FSK, FHSS, GMSK, MSK
Availability: 5476 PCS
Please fill in the short form below and we will provide you the quotation immediately.
ADF7021-NBCPZ General Description
The ADF7021-NBCPZ is a low-power, narrowband transceiver IC (Integrated Circuit) developed by Analog Devices. It is designed for reliable and energy-efficient wireless communication in narrowband applications.
Key Features
- Low power, narrow-band transceiver
- Frequency bands using dual VCO80 MHz to 650 MHz842 MHz to 916 MHz
- Programmable IF filter bandwidths of 9 kHz, 13.5 kHz, and 18.5 kHz
- Modulation schemes: 2FSK, 3FSK, 4FSK, MSK
- Spectral shaping: Gaussian and raised cosine filtering
- Fully automatic frequency control loop (AFC)
- On-chip, 7-bit ADC and temperature sensor
- On-chip VCO and fractional-N PLL
- Data rates supported: 0.05 kbps to 24 kbps
- 2.3 V to 3.6 V power supply
- Programmable output power −16 dBm to +13 dBm in 63 steps
- Automatic power amplifier (PA) ramp control
- Receiver sensitivity −130 dBm at 100 bps, 2FSK−122 dBm at 1 kbps, 2FSK
- Patent pending, on-chip image rejection calibration
- Digital received signal strength indication (RSSI)
- Integrated Tx/Rx switch
- 0.1 μA leakage current in power-down mode
Application
The ADF7021-NBCPZ is commonly used in applications such as wireless sensor networks, industrial automation, smart metering, remote monitoring, and control systems where reliable and low-power wireless communication is required.
Specifications
Category | RF and WirelessRF Transceiver ICs | Series | - |
Programmable | Not Verified | Type | TxRx Only |
RF Family/Standard | General ISM < 1GHz | Protocol | - |
Modulation | 2FSK, 2GFSK, 3FSK, 4FSK, FHSS, GMSK, MSK | Frequency | 80MHz ~ 650MHz, 842MHz ~ 916MHz |
Data Rate (Max) | 24kbps | Power - Output | 13dBm |
Sensitivity | -130dBm | Memory Size | - |
Serial Interfaces | SPI, UART | Voltage - Supply | 2.3V ~ 3.6V |
Current - Receiving | 17.5mA ~ 26.4mA | Current - Transmitting | 13.5mA ~ 32.3mA |
Operating Temperature | -40°C ~ 85°C | Mounting Type | Surface Mount |
Base Product Number | ADF7021 |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Availability: 5476 PCS
+BOMQty. | Unit Price | Ext. Price |
---|---|---|
1+ | $6.068 | $6.07 |
10+ | $5.356 | $53.56 |
30+ | $4.923 | $147.69 |
100+ | $3.832 | $383.20 |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for ADF7021-NBCPZ, guaranteed quotes back within 12hr.
Top Sellers
-
ADF4355
ADI
Phase Locked Loops - PLL Wideband PLL w/ int ultra low noise VCO
-
AD9364BBCZ
Analog Devices Inc.
1 x 1 RF Agile Transceiver
-
ADRF5020BCCZN
Analog Devices Inc.
100MHz~30GHz 65dB 2dB LGA-20(3x3) RF Switches ROHS
-
HMC424ALP3E
Analog Devices, Inc
6Bit 0.5dBStep 31.5dB 13GHz 16-Pin LFCSP EP Cut Tape
-
HMC451LC3
ADI
Medium Power Amplifier SMT, 5 - 20 GHz
Delivery to samara 5 days. Measured parameters. Maximum drain-source voltage vds = more than 540 volts. The capacity of the transition tester intended about 1480 pf. Rds transport resistance is about 0,34 ohm. Transistors are good. The seller and the product definitely recommend!!!