Payment Method
AD8343ARU +BOM
RF Mixer IC Cellular, WLAN Up/Down Converter 0Hz ~ 2.5GHz 14-TSSOP
TSSOP-14-
Manufacturer:
-
Mfr.Part #:
AD8343ARU
-
Datasheet:
-
RF Frequency:
50 MHz to 2.5 GHz
-
Conversion Loss - Max:
7 dB
-
NF - Noise Figure:
14 dB
-
Maximum Operating Frequency:
2.5 GHz
-
EDA/CAD Models:
Availability: 4658 PCS
Please fill in the short form below and we will provide you the quotation immediately.
AD8343ARU General Description
The AD8343 is a high-performance broadband active mixer. With wide bandwidth on all ports and very low intermodulation distortion, the AD8343 is well suited for demanding transmit applications or receive channel applications.
The AD8343 provides a typical conversion gain of 7 dB. The integrated LO driver supports a 50 Ω differential input impedance with low LO drive level, helping to minimize external component count.
The open-emitter differential inputs can be interfaced directly to a differential filter or driven through a balun (transformer) to provide a balanced drive from a single-ended source.
The open-collector differential outputs can be used to drive a differential IF signal interface or convert to a single-ended signal through the use of a matching network or transformer. When centered on the VPOS supply voltage, the outputs swing ±1 V.
The LO driver circuitry typically consumes 15 mA of current. Two external resistors are used to set the mixer core current for required performance, resulting in a total current of 20 mA to 60 mA. This corresponds to power consumption of 100 mW to 300 mW with a single 5 V supply.
The AD8343 is fabricated on Analog Devices, Inc.’s high-performance 25 GHz silicon bipolar IC process. The AD8343 is available in a 14-lead TSSOP package. It operates over a −40°C to +85°C temperature range. A device-populated evaluation board is available.
Key Features
- High-performance active mixer
- Broadband operation to 2.5 GHz
- Conversion gain: 7 dB
- Input IP3: 16.5 dBm
- LO drive: –10 dBm
- Noise figure: 14 dB
- Input P1dB: 2.8 dBm
- Differential LO, IF and RF Ports
- 50 Ω LO input impedance
- Single-supply operation: 5 V @ 50 mA typical
- Power-down mode @ 20 μA typical
Application
- Cellular base stations
- Wireless LAN
- Satellite converters
- SONET/SDH radio
- Radio links
- RF instrumentation
Specifications
Product Category | RF Mixer | RF Frequency | 50 MHz to 2.5 GHz |
Conversion Loss - Max | 7 dB | NF - Noise Figure | 14 dB |
Maximum Operating Frequency | 2.5 GHz | Operating Supply Current | 50 mA |
Operating Supply Voltage | 5 V | Product Type | RF Mixer |
Series | AD8343 | Subcategory | Wireless & RF Integrated Circuits |
Technology | Si | Unit Weight | 0.004949 oz |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
In Stock: 4,658
Minimum Order: 1
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | $18.665 | $18.66 |
200+ | $7.223 | $1,444.60 |
500+ | $6.971 | $3,485.50 |
1000+ | $6.845 | $6,845.00 |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for AD8343ARU, guaranteed quotes back within 12hr.
Top Sellers
-
AD9364BBCZ
Analog Devices Inc.
1 x 1 RF Agile Transceiver
-
ADRF5020BCCZN
Analog Devices Inc.
100MHz~30GHz 65dB 2dB LGA-20(3x3) RF Switches ROHS
-
HMC424ALP3E
Analog Devices, Inc
6Bit 0.5dBStep 31.5dB 13GHz 16-Pin LFCSP EP Cut Tape
-
HMC451LC3
ADI
Medium Power Amplifier SMT, 5 - 20 GHz
-
HMC441LC3B
Analog Devices
GaAs pHEMT MMIC Medium Power Amplifier, 6 - 18 GHz