This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

AD8022ARZ

Voltage Feedback Amplifier 2 Circuit 8-SOIC

Manufacturer: Analog Devices Inc.
Mfr.Part #: AD8022ARZ
Datasheet: AD8022ARZ Datasheet (PDF)
Amplifier Type: Voltage Feedback
Number of Circuits: 2
Slew Rate: 50V/µs
Gain Bandwidth Product: 100 MHz

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

AD8022ARZ General Description

In an xDSL line interface circuit, the AD8022's op amps can be configured as the differential receiver from the line transformer or as independent active filters.

Key Features

Low power amplifiers provide low noise and low distortion, ideal for xDSL modem receiver
Wide supply range: +5 V, ±2.5 V to ±12 V voltage supply
Low power consumption
4.0 mA/amp
Voltage feedback
Ease of use
Lower total noise (insignificant input current noise contribution compared to current feedback amps)
Low noise and distortion
2.5 nV/√Hz voltage noise @ 100 kHz
1.2 pA/√Hz current noise
MTPR < -66 dBc (G = +7)
SFDR 110 dB @ 200 kHz
High speed
130 MHz bandwidth (–3 dB), G = +1
Settling time to 0.1%, 68 ns
50 V/µs slew rate
High output swing
±10.1 V on ±12 V supply
Low offset voltage, 1.5 mV typical

Specifications

Package	Tube	Product Status	Active
Amplifier Type	Voltage Feedback	Number of Circuits	2
Slew Rate	50V/µs	Gain Bandwidth Product	100 MHz
-3db Bandwidth	130 MHz	Current - Input Bias	2.5 µA
Voltage - Input Offset	1.5 mV	Current - Supply	4mA
Current - Output / Channel	55 mA	Voltage - Supply Span (Min)	4.5 V
Voltage - Supply Span (Max)	26 V	Operating Temperature	-40°C ~ 85°C
Mounting Type	Surface Mount	Supplier Device Package	8-SOIC
Base Product Number	AD8022