This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

AD2427WCCSZ-RL

AUDIO A2B TRANSCEIVR 1CH 32LFCSP

Manufacturer:

Analog Devices, Inc
Mfr.Part #:

AD2427WCCSZ-RL
Datasheet:

AD2427WCCSZ-RL Datasheet (PDF)
Series:

Automotive
Function:

Audio Transceiver
Applications:

Automotive Audio
Number of Channels:

1
EDA/CAD Models:

Request Free CAD Models for AD2427WCCSZ-RL

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

AD2427WCCSZ-RL General Description

The Automotive Audio Bus (A2B®) provides a multichannel, I2S/TDM link over distances of up to 15 m between nodes. It embeds bidirectional synchronous pulse-code modulation (PCM) data (for example, digital audio), clock, and synchronization signals onto a single differential wire pair. A2B supports a direct point to point connection and allows multiple, daisy-chained nodes at different locations to contribute and/or consume time division multiplexed (TDM) channel content. A2B is a single-master, multiple-slave system where the transceiver at the host controller is the master. The master generates clock, synchronization, and framing for all slave nodes. The master A2B transceiver is programmable over a control port (I2C) for configuration and read back. An extension of this control port is embedded in the A2B data stream, which grants direct access of registers and status information on slave transceivers as well as I2C to I2C communication over distance. The transceiver can connect directly to general-purpose digital signal processors (DSPs), field-programmable gate arrays (FPGAs), application specific integrated circuits (ASICs), microphones, analog-to-digital converters (ADCs), digital-to-analog converters (DACs), and codecs through a multichannel I2S/TDM interface. It also provides a pulse density modulation (PDM) interface for direct connection of up to four PDM digital microphones. Finally, the transceiver also supports an A2B bus powering feature, where the master node supplies voltage and current to the slave nodes over the same daisy-chained, twisted pair wire cable as used for the communication link. Table 1. Product Comparison Guide Feature AD2420/ AD2420W AD2426/ AD2426W AD2427/ AD2427W AD2428/ AD2428W AD2429/ AD2429W Master capable No No No Yes Yes Number of slaves discoverable1 N/A N/A N/A Up to 10 Up to 2 Functional TRX blocks A only A only A + B A + B B only I2S/TDM support No No No Yes Yes PDM microphone inputs 2 mics2 4 mics 4 mics 4 mics 4 mics Max node to node cable length 5 m 15 m 15 m 15 m 5 m 1 N/A means not applicable. 2 PDM microphones must be connected to the DRX0/IO5 pin. Applications Audio communication link Microphone arrays Beamforming Hands free and in car communication Active and road noise cancellation Audio/video conferencing systems

Specifications

Category	Integrated Circuits (ICs)Audio Special Purpose	Series	Automotive
Function	Audio Transceiver	Applications	Automotive Audio
Number of Channels	1	Interface	I²C, I²S
Voltage - Supply	3V ~ 3.63V	Operating Temperature	-40°C ~ 105°C
Specifications	-	Mounting Type	Surface Mount, Wettable Flank
Base Product Number	AD2427	feature-maximum-operating-supply-voltage-v
feature-minimum-operating-supply-voltage-v		feature-process-technology
feature-packaging	Tape and Reel	feature-pin-count	32
feature-cecc-qualified		feature-esd-protection
feature-military	No	feature-aec-qualified	Yes
feature-aec-qualified-number	AEC-Q100	feature-auto-motive	Yes
feature-p-pap		feature-eccn-code	EAR99
feature-svhc		feature-svhc-exceeds-threshold	No