This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

ACS713ELCTR-30A 8-SOIC (0.154", 3.90mm Width)

Images are for reference only,

See Technical Specifications

ACS713ELCTR-30A +BOM

SENSOR CURRENT HALL 30A DC

Manufacturer:

ALLEGRO
Mfr.Part #:

ACS713ELCTR-30A
Datasheet:

ACS713ELCTR-30A Datasheet (PDF)
ECCN (US):

EAR99
HTS:

8542.39.00.01
SVHC:

Yes
Automotive:

No

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

ACS713ELCTR-30A General Description

DescriptionThe Allegro®ACS713 provides economical and precise solutions for DC current sensing in industrial, commercial, and communications systems. The device package allows for easy implementation by the customer. Typical applications include motor control, load detection and management, switch-mode power supplies, and overcurrent fault protection. The device is not intended for automotive applications.Features and Benefits▪ Low-noise analog signal path▪ Device bandwidth is set via the new FILTER pin▪5 μs output rise time in response to step input current▪ 80 kHz bandwidth▪ Total output error 1.5% at TA = 25°C▪ Small footprint, low-profile SOIC8 package▪1.2 mΩinternal conductor resistance▪ 2.1 kVRMS minimum isolation voltage from pins 1-4 to pins 5-8▪ 5.0 V, single supply operation▪ 133 to 185 mV/A output sensitivity▪ Output voltage proportional to DC currents▪ Factory-trimmed for accuracy▪ Extremely stable output offset voltage▪ Nearly zero magnetic hysteresis▪ Ratiometric output from supply voltage

Key Features

▪ Low-noise analog signal path
▪ Device bandwidth is set via the new FILTER pin
▪5 μs output rise time in response to step input current
▪ 80 kHz bandwidth
▪ Total output error 1.5% at TA = 25°C
▪ Small footprint, low-profile SOIC8 package
▪1.2 mΩinternal conductor resistance
▪ 2.1 kVRMS minimum isolation voltage from pins 1-4 to pins 5-8
▪ 5.0 V, single supply operation
▪ 133 to 185 mV/A output sensitivity
▪ Output voltage proportional to DC currents
▪ Factory-trimmed for accuracy
▪ Extremely stable output offset voltage
▪ Nearly zero magnetic hysteresis
▪ Ratiometric output from supply voltage

Specifications

ECCN (US)	EAR99	Part Status	Active
HTS	8542.39.00.01	SVHC	Yes
Automotive	No	PPAP	No
Type	Open Loop	Module/IC Classification	IC
Sensing Current Type	DC	Typical RMS Primary Current (A)	30
Accuracy (%)	±1.5	Typical Response Time (us)	3.5
Maximum Output Voltage (V)	8	Minimum Operating Supply Voltage (V)	4.5
Typical Operating Supply Voltage (V)	5	Maximum Operating Supply Voltage (V)	5.5
Sensitivity (mV/A)	133	Minimum Operating Temperature (°C)	-40
Maximum Operating Temperature (°C)	85	Packaging	Tape and Reel
Mounting	Surface Mount	PCB changed	8
Pin Count	8	Lead Shape	Gull-wing