This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

5P49V5935A000LTGI

Clock Generators & Support Products 1 PLL 25MHz Cryst 2 Config O/P Pairs

Manufacturer:

Renesas Electronics
Mfr.Part #:

5P49V5935A000LTGI
Datasheet:

5P49V5935A000LTGI Datasheet (PDF)
Series:

5P49V5935A
Type:

Programmable Clock Generators
Maximum Input Frequency:

350 MHz
Max Output Freq:

350 MHz

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

5P49V5935A000LTGI General Description

The 5P49V5935 is a programmable clock generator intended for high performance consumer, networking, industrial, computing, and data communications applications. Configurations may be stored in on-chip One-Time Programmable (OTP) memory or changed using an I2C interface. This is IDT's fifth generation of programmable clock technology (VersaClock® 5). The 5P49V5935, by default, uses an integrated 25 MHz crystal as an input reference. It also has a redundant external clock input. A glitchless manual switchover function allows selection of either input reference during normal operation.

Two select pins allow up to 4 different configurations to be programmed and accessible using processor GPIOs or bootstrapping. The different selections may be used for different operating modes (full function, partial function, partial power-down), regional standards (US, Japan, Europe) or system production margin testing. The device may be configured to use one of two I2C addresses to allow multiple devices to be used in a system.

Key Features

4 differential outputs LVPECL, LVDS, HCSL - or 4 LVCMOS outputs
<0.7 ps RMS typical phase jitter on outputs
Four fractional output dividers (FODs)
Independent Spread Spectrum capability on each output pair
Stores 4 different configurations in OTP non-volatile memory
Up to 350 MHz input/output frequencies
Redundant clock inputs with manual switchover
Programmable loop bandwidth, output to output skew, slew rate control
Individual output enable/disable
Meets PCIe® Gen1/2/3, USB 3.0, 1/10 GbE clock requirements
1.8 / 2.5 / 3.3V core and output voltages
4x4 mm 24-pin VFQFPN package
-40° to +85°C operating temperature range
Supported by IDT Timing Commander™ software tool

Specifications

Product Category	Clock Generators & Support Products	Series	5P49V5935A
Type	Programmable Clock Generators	Maximum Input Frequency	350 MHz
Max Output Freq	350 MHz	Number of Outputs	4 Output
Duty Cycle - Max	70 %	Operating Supply Voltage	1.71 V to 3.465 V
Operating Supply Current	30 mA	Minimum Operating Temperature	- 40 C
Maximum Operating Temperature	+ 85 C	Mounting Style	SMD/SMT
Height	1.4 mm	Jitter	0.7 ps
Length	4 mm	Moisture Sensitive	Yes
Output Type	HCSL, LVCMOS, LVDS, LVPECL	Product Type	Clock Generators
Factory Pack Quantity	490	Subcategory	Clock & Timer ICs
Tradename	VersaClock	Width	4 mm