This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

5KP15A

24.4V Clamp 209A Ipp Tvs Diode Through Hole P600

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

24.4V Clamp 209A Ipp Tvs Diode Through Hole P600

5000W peak pulse capability at 10/1000μs waveform, repetition rate (duty cycles):0.01%
Glass passivated chip junction in P600 package
Fast response time: typically less than 1.0ps from 0 Volts to BV min
Excellent clamping capability
Typical failure mode is short from over-specifed voltage or current
Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c
IEC-61000-4-2 ESD 30kV(Air), 30kV (Contact)
ESD protection of data lines in accordance with IEC 61000-4-2
EFT protection of data lines in accordance with IEC 61000-4-4
Low incremental surge resistance
Typical IR less than 2μA when VBR min>12V
High temperature to reﬂow soldering guaranteed:
260°C/40sec / 0.375”, (9.5mm) lead length, 5 lbs., (2.3kg) tension
VBR @ TJ=
[email protected]°C
x (1+αT x (T J - 25))
(αT:Temperature Coeffcient, typical value is 0.1%)
Plastic package is ﬂammability rated V-0 per Underwriters Laboratories
Matte tin lead–free plated
Halogen free and RoHS compliant
Pb-free E3 means 2nd level interconnect is
Pb-free and the terminal fnish material is tin(Sn) (IPC/JEDEC J-STD-

Pbfree Code	No	Part Life Cycle Code	Transferred
Pin Count	2	Reach Compliance Code
ECCN Code	EAR99	HTS Code	8541.10.00.50
Breakdown Voltage-Max	18.5 V	Breakdown Voltage-Min	16.7 V
Breakdown Voltage-Nom	17.6 V	Case Connection	ISOLATED
Clamping Voltage-Max	24.4 V	Configuration	SINGLE
Diode Element Material	SILICON	Diode Type	TRANS VOLTAGE SUPPRESSOR DIODE
JESD-30 Code	O-PALF-W2	JESD-609 Code	e3
Moisture Sensitivity Level	1	Non-rep Peak Rev Power Dis-Max	5000 W
Number of Elements	1	Number of Terminals	2
Operating Temperature-Max	175 °C	Operating Temperature-Min	-55 °C
Peak Reflow Temperature (Cel)	260	Polarity	UNIDIRECTIONAL
Power Dissipation-Max	8 W	Qualification Status	Not Qualified
Reference Standard	UL RECOGNIZED	Rep Pk Reverse Voltage-Max	15 V
Surface Mount	NO	Technology	AVALANCHE
Terminal Finish	MATTE TIN	Terminal Form	WIRE
Terminal Position	AXIAL	Time@Peak Reflow Temperature-Max (s)	10