This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

1N5350B

Zener Diode Single 2-Pin 13V, 5% Tolerance , 2.5Ohm, 5000mW Case T-18 T/R.

Manufacturer:

NTE Electronics, Inc
Mfr.Part #:

1N5350B
Datasheet:

1N5350B Datasheet (PDF)
Voltage - Zener (Nom) (Vz):

13 V
Tolerance:

±5%
Power - Max:

5 W
Impedance (Max) (Zzt):

2.5 Ohms
EDA/CAD Models:

Request Free CAD Models for 1N5350B

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

1N5350B General Description

The 1N5333B through 1N5388B JEDEC registered series of axial-leaded 5.0-watt Zener’s provides a selection from 3.3 to 200 volts with different tolerances as identified by specific suffix letter on the part number. These plastic encapsulated Zener’s have a moisture classification of “Level 1” with no dry pack required. They may be operated at high maximum dc currents with adequate heat sinking due to their comparatively low thermal resistance design. Microchip also offers numerous other Zener products to meet higher and lower power applications.

Key Features

JEDEC registered 1N5333 thru 1N5388 series
Zener voltage available 3.3 V to 200 V
Plus/minus 10%, 5% and 2% voltage tolerances are available
RoHS compliant versions available
Regulates voltage over broad operating current and temperature ranges
Wide selection from 3.3 to 200 V
Flexible axial-lead mounting terminals
Non-sensitive to ESD per MIL-STD-750 method 1020
Withstands high surge stresses
Minimal changes of voltage versus current
High specified maximum current (IZM) with adequate heat sinking
Moisture classification is “Level 1” per IPC/JEDEC J-STD-020B with no dry pack required.

Specifications

Voltage - Zener (Nom) (Vz)	13 V	Tolerance	±5%
Power - Max	5 W	Impedance (Max) (Zzt)	2.5 Ohms
Current - Reverse Leakage @ Vr	1 µA @ 9.9 V	Voltage - Forward (Vf) (Max) @ If	1.2 V @ 1 A
Operating Temperature	-65°C ~ 200°C	Mounting Type	Through Hole