This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

UCC21530QDWKRQ1 +BOM

Dual-channel gate driver for automotive applications with 4A and 6A output current capabilities, featuring a 5

Manufacturer:

Texas Instruments, Inc
Mfr.Part #:

UCC21530QDWKRQ1
Datasheet:

UCC21530QDWKRQ1 Datasheet (PDF)
Series:

Automotive, AEC-Q100
Programmable:

Not Verified
Driven Configuration:

Half-Bridge
Channel Type:

Independent
EDA/CAD Models:

Request Free CAD Models for UCC21530QDWKRQ1

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

UCC21530QDWKRQ1 General Description

The UCC21530QDWKRQ1 is a gate driver IC that provides a robust and reliable solution for controlling power semiconductor switches like MOSFETs and IGBTs. It is designed to enhance the efficiency and performance of power conversion systems.

The UCC21530-Q1 is an isolated dual-channel gate driver with 4-A source and 6-A sink peak current. It is designed to drive IGBTs, Si MOSFETs, and SiC MOSFETs up to 5-MHz with best-in-class propagation delay and pulse-width distortion.

The input side is isolated from the two output drivers by a 5.7-kVRMS reinforced isolation barrier, with a minimum of 100-V/ns common-mode transient immunity (CMTI). Internal functional isolation between the two secondary-side drivers allows a working voltage of up to 1850 V.

This driver can be configured as two low-side drivers, two high-side drivers, or a half-bridge driver with programmable dead time (DT). The EN pin pulled low shuts down both outputs simultaneously and allows for normal operation when left open or pulled high. As a fail-safe measure, primary-side logic failures force both outputs low.

The device accepts VDD supply voltages up to 25 V. A wide input VCCI range from 3 V to 18 V makes the driver suitable for interfacing with both analog and digital controllers. All the supply voltage pins have under voltage lock-out (UVLO) protection.

Key Features

AEC-Q100 qualified with:
Device temperature grade 1
Device HBM ESD classification level H2
Device CDM ESD classification level C6
Functional Safety Quality-Managed
Documentation available to aid functional safety system design
Universal: dual low-side, dual high-side or half-bridge driver
Wide body SOIC-14 (DWK) package
3.3-mm spacing between driver channels
Switching parameters:
19-ns typical propagation delay
10-ns minimum pulse width
5-ns maximum delay matching
6-ns maximum pulse-width distortion
Common-mode transient immunity (CMTI) greater than 100-V/ns
Isolation barrier life >40 years
4-A peak source, 6-A peak sink output
TTL and CMOS compatible inputs
3-V to 18-V input VCCI range
Up to 25-V VDD output drive supply
8-V and 12-V VDD UVLO options
Programmable overlap and dead time
Rejects input pulses and noise transients shorter than 5 ns
Operating temperature range –40 to +125°C
Safety-related certifications:
8000-V
PK
5.7-kV
RMS
CSA certification per IEC 60950-1, IEC 62368-1, IEC 61010-1 and IEC 60601-1 end equipment standards
CQC certification per GB4943.1-2011

Application

Automotive: It can be found in automotive power electronics systems, such as motor drives, traction inverters, and battery management systems.
Industrial: In industrial drives, uninterruptible power supplies (UPS), and robotics for controlling high-power switches.
Renewable Energy: Used in solar inverters, wind turbine systems, and power converters for efficient energy conversion.
Motor Control: In motor control applications like electric vehicle drives and industrial motor drives.
Power Electronics: It is a critical component in power electronic converters, including DC-DC converters and DC-AC inverters.
Electric Vehicle (EV) and Hybrid Electric Vehicle (HEV) Systems: In the power electronics systems of electric and hybrid vehicles for efficient energy management and motor control.
Battery Management Systems: For managing the charging and discharging of batteries in various applications.
Grid-Tied Inverters: In grid-tied solar inverters for converting DC power from solar panels to AC power for the grid.

Specifications

Category	Integrated Circuits (ICs)Power Management (PMIC)Gate Drivers	Series	Automotive, AEC-Q100
Programmable	Not Verified	Driven Configuration	Half-Bridge
Channel Type	Independent	Number of Drivers	2
Gate Type	IGBT, N-Channel, P-Channel MOSFET	Voltage - Supply	3V ~ 18V
Logic Voltage - VIL, VIH	1.2V, 1.6V	Current - Peak Output (Source, Sink)	4A, 6A
Input Type	CMOS/TTL	Rise / Fall Time (Typ)	6ns, 7ns
Operating Temperature	-40°C ~ 130°C (TJ)	Mounting Type	Surface Mount
Base Product Number	UCC21530	Product Category	Galvanically Isolated Gate Drivers
Type	Half-Bridge	Mounting Style	SMD/SMT
Number of Outputs	2 Output	Output Current	6 A
Supply Voltage - Min	3 V	Supply Voltage - Max	18 V
Rise Time	6 ns	Fall Time	7 ns
Minimum Operating Temperature	- 40 C	Maximum Operating Temperature	+ 125 C
Qualification	AEC-Q100	Logic Type	CMOS, TTL
Moisture Sensitive	Yes	Operating Supply Current	3 mA
Output Voltage	25 V	Pd - Power Dissipation	1.81 W
Product	Isolated Gate Drivers	Product Type	Galvanically Isolated Gate Drivers
Propagation Delay - Max	30 ns	Rds On - Drain-Source Resistance	5 Ohms
Factory Pack Quantity	2000	Subcategory	PMIC - Power Management ICs
Unit Weight	0.025013 oz

Service Policies and Others

After-Sales & Settlement Related

Payment

Payment Method

TT/Wire Transfer

Paypal

Western Union

Money Gram

For alternative payment channels, please reach out to us at:

[email protected]

Shipping & Packing

Shipping Method

Fedex

UPS

DHL

NTN

Packing

AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.

Warranty

365-Day Product

Quality Guarantee

We promise to provide 365 days quality assurance service for all our products.

Ratings and Reviews

J**b 01/24/2024

****** Seller highly recommended. ****** Excellent product, good quality, works as intended, fast delivery, carefully and professionally packaged, thank You! Friendly regards and best wishes _ Jack