This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

TS3USB30ERSWR

10Ω 1 DPDT(DPDT) UQFN-10(1.4x1.8) Analog Switches / Multiplexers ROHS

Manufacturer:

Texas Instruments
Mfr.Part #:

TS3USB30ERSWR
Datasheet:

TS3USB30ERSWR Datasheet (PDF)
Type:

Passive mux
Function:

USB 2.0
USB speed (MBits):

480
Number of channels:

2
EDA/CAD Models:

Request Free CAD Models for TS3USB30ERSWR

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

TS3USB30ERSWR General Description

The TS3USB30E is a high-bandwidth 1:2 switch specially designed for the switching of high-speed USB 2.0 signals in handset and consumer applications, such as cell phones, digital cameras, and notebooks with hubs or controllers with limited USB I/Os. The wide bandwidth (900 MHz) of this switch allows signals to pass with minimum edge and phase distortion. The device multiplexes differential outputs from a USB host device to one of two corresponding outputs, or from two different hosts to one corresponding output. The switch is bidirectional and offers little or no attenuation of the high-speed signals at the outputs. It is designed for low bit-to-bit skew and high channel-to-channel noise isolation, and is compatible with various standards, such as high-speed USB 2.0 (480 Mbps).

The TS3USB30E integrates ESD protection cells on all pins, is available in a tiny UQFN package (1.8 mm × 1.4 mm) or a VSSOP package, and is characterized over the free-air temperature range of 40°C to 85°C.

Key Features

V_CC Operation at 3 V to 4.3 V
D+/D– Pins Tolerate up to 5.25 V
1.8-V Compatible Control-Pin Inputs
I_OFF Supports Partial Power-Down-Mode
Operation
R_ON = 10 Ω Maximum
ΔR_ON = 0.35 Ω Typical
C_io(ON) = 7.5 pF Typical
Low Power Consumption (1 µA Maximum)
–3-dB Bandwidth = 900 MHz Typical
Latch-Up Performance Exceeds
100 mA Per JESD 78, Class II⁽¹⁾
ESD Performance Tested Per JESD 22
- 8000-V Human-Body Model
  (A114-B, Class II)
- 1000-V Charged-Device Model (C101)
ESD Performance I/O Port to GND⁽²⁾
- 15000-V Human-Body Model
Packaged in 10-pin UQFN (1.4 mm × 1.8 mm)

Specifications

Type	Passive mux	Function	USB 2.0
USB speed (MBits)	480	Number of channels	2
Supply voltage (max) (V)	4.3	Supply voltage (min) (V)	3
Ron (typ) (mΩ)	6000	Input/output voltage (min) (V)	0
Input/output voltage (max) (V)	4.3	Configuration	2:1 SPDT
Features	Logic Controlled (Output Enabled), USB 2.0	Rating	Catalog
Operating temperature range (°C)	-40 to 85	Supply current (max) (µA)	1
ESD HBM (typ) (kV)	8	Bandwidth (MHz)	900

Service Policies and Others

After-Sales & Settlement Related

Payment

Payment Method

TT/Wire Transfer

Paypal

Western Union

Money Gram

For alternative payment channels, please reach out to us at:

[email protected]

Shipping & Packing

Shipping Method

Fedex

UPS

DHL

NTN

Packing

AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.

Warranty

365-Day Product

Quality Guarantee

We promise to provide 365 days quality assurance service for all our products.

Ratings and Reviews

v**n 09/14/2023

The goods came in 1 week. Ordered 1600 v 104j and 1600 v 105j. Capacitors are good. Capacity accuracy within 5%. Served a megger 1000 volts, the capacitor did not break. Seller advise

A**n 08/13/2023

Thank you the order arrived in the declared time,

L**n 12/30/2022

The product corresponds to the description of all ok

O**n 02/13/2020

Cheap and good quality.