This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

TS3USBA225RUTR +BOM

2 triple-pole/single-throw(SP3T) UQFN-12(1.7x2) Analog Switches / Multiplexers ROHS

TS3USBA225RUTR Information

Description

The Texas Instruments TS3USBA225RUTR is a high-speed USB and MHL switch with audio capabilities. It's designed for applications that require low power consumption, high-speed data transfer, and reliable audio switching. The device features a 2.7V to 5.0V operating power supply, allowing it to be used in a variety of systems. The TS3USBA225RUTR has a MHL/High-Speed USB switch with a bandwidth of up to 1.9 GHz, making it suitable for applications that require high-speed data transfer. The device also features an audio switch with low THD and internal shunt resistors for click-and-pop reduction. The TS3USBA225RUTR is available in a 12-pin QFN package and has been tested to withstand ESD events up to 2000V human-body model and 1000V charged-device model. It's an ideal component for applications such as smartphones, tablets, and other mobile devices that require high-speed data transfer and reliable audio switching.

Features

According to the product information, the features of TS3USBA225RUTR are:

  • MHL/High-Speed USB (480 Mbps) switch with:
  • + V I/O that accepts signals up to 4.5V (independent of VCC)
  • + 6.5 Ω rON Typical, 3 pF C ON Typical, and 1.9 GHz Bandwidth (-3 dB)
  • Audio switch with:
  • + 2.5 Ω rON Typical
  • + Negative rail capability down to -1.8V
  • + Low THD (< 0.05%)
  • + Internal shunt resistors for click-and-pop reduction
  • 1.8-V Compatible control input (SEL1 and SEL2)
  • Minimized current consumption (~5 µA) in power-down mode
  • Power-off protection: all I/O pins are high-Z when VCC = 0V
  • ESD performance tested per JESD 22.

Package

The package type for TS3USBA225RUTR is UQFN12, a 12-pin package with a size of 2 mm x 1.7 mm and a pitch of 0.4 mm.

Pinout

The TS3USBA225RUTR from Texas Instruments is a 12-pin UQFN package. The pinout includes:

  • VCC: Power supply input (2.7V to 5.0V)
  • SEL1, SEL2: Control inputs for switching
  • I/O: Input/output pins for MHL/USB and audio signals
  • GND: Ground pins

The device is a high-speed USB and MHL switch with an audio switch function. It has low THD (<0.05%) and internal shunt resistors to reduce click-and-pop noise. The part also features ESD protection up to 2000V HBM and 1000V CDM.

Manufacturer

The manufacturer of the TS3USBA225RUTR is Texas Instruments (TI). Texas Instruments is a multinational semiconductor company that designs, manufactures, and tests semiconductors and other electronic components. The company was founded in 1930 and is headquartered in Dallas, Texas, USA. TI is one of the largest and most well-known semiconductor companies in the world, with a wide range of products including microprocessors, memory chips, and analog ICs.

Equivalent

Based on the features and specifications, equivalent products to TS3USBA225RUTR could be:

  • Texas Instruments TPS65983
  • ON Semiconductor NCP3801
  • STMicroelectronics STM32F103
  • Analog Devices ADG1404

These products share similar characteristics such as USB switching, audio switching, and ESD protection. However, please note that the exact equivalent product may depend on specific application requirements and design constraints.

TS3USBA225RUTR

Specifications

Type Passive mux Function USB 2.0
USB speed (MBits) 480 Number of channels 2
Supply voltage (max) (V) 5 Supply voltage (min) (V) 2.7
Ron (typ) (mΩ) 6500 Input/output voltage (min) (V) -1.8
Input/output voltage (max) (V) 4.3 Configuration 3:1
Features Audio Switch (Negative Rail Capability), Click and pop noise reduction, Logic Controlled (Output Enabled), Mobile High-Definition Link (MHL), USB 2.0 Rating Catalog
Operating temperature range (°C) -40 to 85 Supply current (max) (µA) 50
ESD HBM (typ) (kV) 2 Bandwidth (MHz) 1900
Package/Case UFQFN-12

Service Policies and Others

After-Sales & Settlement Related

payment Payment

Payment Method

hsbc
TT/Wire Transfer
paypal
Paypal
wu
Western Union
mg
Money Gram

For alternative payment channels, please reach out to us at:

[email protected]
shipping Shipping & Packing

Shipping Method

fedex
Fedex
ups
UPS
dhl
DHL
tnt
TNT
Packing

AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.

Warranty Warranty

We promise to provide 365 days quality assurance service for all our products.

Ratings and Reviews

More
E
E**a 03/26/2023

Everything is fine! Relatively fast delivery for such a small order.

15
C
C**g 03/26/2022

Quoted and delivery quality product. look forward to doing more business with them.

19
J
J**e 02/21/2021

The spark gives a good and noisy:-)

2
S
S**n 12/25/2020

Workers, but magnetize. The legs are itchy well. Fast free delivery-to krasnoyarsk in 17 days. Seller +

10

Reviews

You need to log in to reply. Sign In | Sign Up