Payment Method
TPS65100PWP +BOM
With its advanced features and reliable operation
HTSSOP (PWP)-24-
Manufacturer:
-
Mfr.Part #:
TPS65100PWP
-
Datasheet:
-
Display Type:
LCD unipolar
-
IC Integration:
LCD bias, VCOM
-
Vin (min) (V):
2.7
-
Vin (max) (V):
5.8
-
EDA/CAD Models:
Send all BOMs to [email protected], or fill out the form below for a quote on TPS65100PWP. Guaranteed response within 12hr.
Availability: 5753 PCS
Please fill in the short form below and we will provide you the quotation immediately.
Description
The Texas Instruments TPS65100PWP is a 4-channel LCD bias controller with a fully integrated positive charge pump, 3.3V linear regulator, and 1.6A minimum boost current limiter. It features 2.7-V to 5.8-V input voltage range, 1.6 MHz fixed switching frequency, and three independent adjustable outputs. The product offers high accuracy boost converter output voltage (up to 15 V) and integrates a virtual synchronous converter technology. Additionally, it includes internal soft start, power-on sequencing, and thermal shutdown. This device is suitable for various applications requiring efficient power management, reliable voltage regulation, and optimal performance. It is available in TSSOP-24 and VQFN-24 PowerPAD packages.
Features
According to the product information, the TPS65100PWP features:
- 2.7-V to 5.8-V input voltage range
- 1.6-MHz fixed switching frequency
- 3 independent adjustable outputs
- Boost converter output voltage up to 15 V with < 1% accuracy
- Negative and positive charge pumps (VO2 and VO3)
- Integrated VCOM buffer
- Virtual synchronous converter technology in the boost converter
- Auxiliary 3.3-V linear regulator controller
- Internal soft start and power-on sequencing
- Fault detection of all outputs (TPS65100/05) or no fault detection (TPS65101)
- Thermal shutdown
Please note that these features are based on the provided information, and I do not have any additional knowledge about this product.
Package
The package type for TPS65100PWP is Small Outline Package - PWP (R-PDSO-G24).
Pinout
The TPS65100PWP has a pin count of 24. The pin functions are:
- VCCIN: Input voltage
- GND: Ground
- EN1-3: Enable pins for each output
- OUT1-3: Output voltages
- VCOM: Virtual COM output
- FAULT: Fault detection output
- PWRON: Power-on reset input
- INTVCC: Internal voltage reference
Please note that this is a brief summary, and you can refer to the datasheet for more detailed information.
Manufacturer
The manufacturer of the TPS65100PWP is Texas Instruments (TI). Texas Instruments is an American semiconductor company that designs, manufactures, and tests semiconductors and other electronic components. The company was founded in 1930 and is headquartered in Dallas, Texas. TI is one of the largest and most well-known semiconductor companies in the world, with a broad portfolio of products including microprocessors, memory devices, radios, GPS components, and more.
Applications
The Texas Instruments TPS65100PWP is a power management IC suitable for various applications, including:
- Display devices (LCD, LED, OLED)
- Mobile phones
- Tablets
- Laptops
- Gaming consoles
- Automotive systems
- Industrial control systems
It provides efficient power delivery, reliable voltage regulation, and optimized performance levels.
Equivalent
According to Texas Instruments, the recommended alternatives or equivalents for the TPS65100PWP are:
- tps65105pwp
- TPS65101PWP (Note: This one lacks fault detection)
Please note that equivalent products may have some differences in features or specifications. It's always best to consult the datasheet or application notes for specific requirements.
Specifications
Display type | LCD unipolar | IC integration | LCD bias, VCOM |
Vin (min) (V) | 2.7 | Vin (max) (V) | 5.8 |
Applications | 7 inches or less, 7 to 13 inches | Source driver voltage (min) (V) | 5 |
Source driver voltage (max) (V) | 15 | Level shifter/scan driver (Ch) | 0 |
V_POS (max) (V) | 30 | V_NEG (max) (V) | -2 |
Features | VCOM or op amp | Topology | Boost |
Rating | Catalog | Operating temperature range (°C) | -40 to 85 |
Package/Case | HTSSOP (PWP)-24 |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
In Stock: 5,753
Minimum Order: 1
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | $1.390 | $1.39 |
10+ | $1.354 | $13.54 |
30+ | $1.331 | $39.93 |
100+ | $1.307 | $130.70 |
The prices below are for reference only.
Related
Top Sellers
-
LM317S
Texas Instruments
1000+ $1.403
-
LM317T
Texas Instruments
5000+ $0.110
-
ULN2003A
Texas Instruments
6000+ $0.060
-
LM2596S
Texas Instruments
Positive fixed regulator IC with high current capability in TO-packag
-
LM7805S
Texas Instruments
Get stable voltage output with LM7805S Linear Voltage Regulators
Thank you!!! The protection board works for 100%!!! To novosibirsk came the order for 48-50 days!!! Ended even sewn order!!! I will take more if necessary!!! Seller recommend!!! Photos will be later!!!