Payment Method
TDA7575B
2 x 75W multifunction dual-bridge power amplifier with integrated digital diagnostics
-
Manufacturer:
-
Mfr.Part #:
TDA7575B
-
Datasheet:
-
prmis_id:
CP117595
-
parent_id:
PF201849
-
p_4906:
true
-
p_445:
No
-
EDA/CAD Models:
Availability: 7004 PCS
Please fill in the short form below and we will provide you the quotation immediately.
TDA7575B General Description
The TDA7575B is a new MOSFET dual bridge amplifier specially intended for car radio applications. Thanks to the DMOS output stage the TDA7575B has a very low distortion allowing a clear powerful sound.Among the features, its superior efficiency performance coming from the internal exclusive structure, makes it the most suitable device to simplify the thermal management in high power sets.The dissipated output power under average listening condition is in fact reduced up to 50% when compared to the level provided by conventional class AB solutions.This device is equipped with a full diagnostic array that communicates the status of each speaker through the I2C bus. The TDA7575B has also the possibility of driving loads down to 1Ω paralleling the outputs into a single channel. It is also possible to disable the I2C and control the TDA7575B by means of the usual standby and mute pins.
Key Features
- Multipower bcd technology
- MOSFET output power stage
- DMOS power output
- New high-efficiency (class AB)
- Single-channel 1 Ω driving capability
- High output power capability 2x28 W/4 Ω @ 14.4 V, 1 kHz, 10 % THD
- Max. output power 2x75 W/2 Ω, 1x150 W/1 Ω
- Single-channel 1 Ω driving capability
- 84 W undistorted power
- Full I2C bus driving with 4 address possibilities:
- Standby
- Play/mute
- Gain 12/26 dB
- Full digital diagnostic (AC and DC loads)
- Possibility to disable the I2C bus
- Differential inputs
- Full fault protection
- DC offset detection
- Two independent short circuit protections
- Diagnostic on clipping detector with selectable threshold (2 % / 10 %)
- Clipping detector as diagnostic pin when I2C bus is disabled
- Standby/mute pins
- ESD protection
Application
- Car radio head units
- External amplifiers
- Multi-channel car audio systems
Specifications
prmis_id | CP117595 | parent_id | PF201849 |
item_name | TDA7575B | p_4906 | true |
p_445 | No | p_5113 | 2252 |
p_1387 | 7.37 | p_163 | Active |
p_4418 | 1000 | Product Category | Audio Amplifiers |
Series | TDA7575B | Product | Audio Amplifiers |
Class | Class-AB | Output Power | 75 W, 150 W |
Mounting Style | Through Hole | Type | 1-Channel Mono or 2-Channel Stereo |
Audio - Load Impedance | 2 Ohms | THD plus Noise | 0.15 % |
Supply Voltage - Max | 18 V | Supply Voltage - Min | 8 V |
Minimum Operating Temperature | - 55 C | Maximum Operating Temperature | + 150 C |
Qualification | AEC-Q100 | CMRR - Common Mode Rejection Ratio | 56 dB |
Description/Function | Speaker | Gain | 26 dB |
Height | 15.7 mm | Input Type | Differential |
Length | 29.23 mm | Number of Channels | 2 Channel |
Operating Supply Voltage | 18 V | Output Current | 8 A |
Output Signal Type | Differential | Pd - Power Dissipation | 86 W |
Product Type | Audio Amplifiers | PSRR - Power Supply Rejection Ratio | 60 dB |
Factory Pack Quantity | 357 | Subcategory | Audio ICs |
Supply Type | Single | Vos - Input Offset Voltage | 45 mV |
Width | 4.5 mm | Unit Weight | 0.250504 oz |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Availability: 7004 PCS
+BOMQty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for TDA7575B, guaranteed quotes back within 12hr.
in this package (20 nos - A316J HCPL) contains uneven batch codes. Totally 5 different batch codes of IC mixed and packed in a single strip.How it is possible..?There is a doubt... is it original IC or not..?How to describe this product as accurate..?No Packing slip (order, item description slip) inside the Package as in usual pls clarify