This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

STM32L412C8T6

ARM® Cortex®-M4 STM32L4 Microcontroller IC 32-Bit Single-Core 80MHz 64KB (64K x 8) FLASH 48-LQFP (7x7)

Manufacturer:

ST
Mfr.Part #:

STM32L412C8T6
Datasheet:

STM32L412C8T6 Datasheet (PDF)
Programmabe:

Not Verified
Core Processor:

ARM® Cortex®-M4
Core Size:

32-Bit Single-Core
Speed:

80MHz
EDA/CAD Models:

Request Free CAD Models for STM32L412C8T6

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

STM32L412C8T6 General Description

The STM32L412xx devices are ultra-low-power microcontrollers based on the high-performance Arm®Cortex®-M4 32-bit RISC core operating at a frequency of up to 80 MHz. The Cortex-M4 core features a Floating point unit (FPU) single precision that supports all Arm®single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances application security.The STM32L412xx devices embed high-speed memories (Flash memory up to 128 Kbyte,40 Kbyte of SRAM), a Quad SPI Flash memories interface (available on all packages) and an extensive range of enhanced I/Os and peripherals connected to two APB buses, two AHB buses and a 32-bit multi-AHB bus matrix.The STM32L412xx devices embed several protection mechanisms for embedded Flash memory and SRAM: readout protection, write protection, proprietary code readout protection and Firewall.The devices offer two fast 12-bit ADC (5 Msps), two comparators, one operational amplifier, a low-power RTC, one general-purpose 32-bit timer, one 16-bit PWM timer dedicated to motor control, four general-purpose 16-bit timers, and two 16-bit low-power timers.In addition, up to 12 capacitive sensing channels are available.They also feature standard and advanced communication interfaces, namely three I2Cs, two SPIs, three USARTs and one Low-Power UART, one USB full-speed device crystal less.The STM32L412xx operates in the -40 to +85 °C (+105 °C junction) and -40 to +125 °C (+130 °C junction) temperature ranges from a 1.71 to 3.6 V VDDpower supply when using internal LDO regulator and a 1.00 to 1.32V VDD12power supply when using external SMPS supply. A comprehensive set of power-saving modes makes possible the design of low-power applications.Some independent power supplies are supported: analog independent supply input for ADC, OPAMP and comparator. A VBAT input makes it possible to backup the RTC and backup registers. Dedicated VDD12power supplies can be used to bypass the internal LDO regulator when connected to an external SMPS.The STM32L412xx family offers six packages from 32 to 64-pin packages.STM32 Nucleo-64 development board with STM32L412.LTE Cellular to Cloud Pack with STM32L496AG MCU.ST-LINK/V2 in-circuit debugger/programmer for ST.Evaluation board with STM32L476ZG MCU.STM32 Nucleo-32 development board with STM32L412.

Key Features

Ultra-low-power with FlexPowerControl
- 1.71 V to 3.6 V power supply
- -40 °C to 85/125 °C temperature range
- 300 nA in V_BAT mode: supply for RTC and 32x32-bit backup registers
- 16 nA Shutdown mode (4 wakeup pins)
- 32 nA Standby mode (4 wakeup pins)
- 245 nA Standby mode with RTC
- 0.7 µA Stop 2 mode, 0.95 µA with RTC
- 79 µA/MHz run mode (LDO Mode)
- 28 μA/MHz run mode (@3.3 V SMPS Mode)
- Batch acquisition mode (BAM)
- 4 µs wakeup from Stop mode
- Brown out reset (BOR)
- Interconnect matrix
Core: Arm^® 32-bit Cortex^®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait-state execution from Flash memory, frequency up to 80 MHz, MPU, 100DMIPS and DSP instructions
Performance benchmark
- 1.25 DMIPS/MHz (Drystone 2.1)
- 273.55 CoreMark^® (3.42 CoreMark/MHz @ 80 MHz)
Energy benchmark
- 442 ULPMark-CP^®
- 165 ULPMark-PP^®
Clock Sources
- 4 to 48 MHz crystal oscillator
- 32 kHz crystal oscillator for RTC (LSE)
- Internal 16 MHz factory-trimmed RC (±1%)
- Internal low-power 32 kHz RC (±5%)
- Internal multispeed 100 kHz to 48 MHz oscillator, auto-trimmed by LSE (better than ±0.25 % accuracy)
- Internal 48 MHz with clock recovery
- PLL for system clock
Up to 52 fast I/Os, most 5 V-tolerant
RTC with HW calendar, alarms and calibration
Up to 12 capacitive sensing channels: support touchkey, linear and rotary touch sensors
10x timers: 1x 16-bit advanced motor-control, 1x 32-bit and 2x 16-bit general purpose, 1x 16-bit basic, 2x low-power 16-bit timers (available in Stop mode), 2x watchdogs, SysTick timer
Memories
- 128 KB single bank Flash, proprietary code readout protection
- 40 KB of SRAM including 8 KB w

Specifications

Programmabe	Not Verified	Core Processor	ARM® Cortex®-M4
Core Size	32-Bit Single-Core	Speed	80MHz
Connectivity	I²C, Infrared, IrDA, LINbus, Quad SPI, SPI, UART/USART, USB	Peripherals	Brown-out Detect/Reset, DMA, PWM, WDT
Number of I/O	38	Program Memory Size	64KB (64K x 8)
Program Memory Type	FLASH	EEPROM Size	-
RAM Size	40K x 8	Voltage - Supply (Vcc/Vdd)	1.71V ~ 3.6V
Data Converters	A/D 10x12b	Oscillator Type	Internal
Operating Temperature	-40°C ~ 85°C (TA)	Mounting Type	Surface Mount